Kodak A-61597 manual Performing a Print test

Page 11

Performing a Print test

The print test checks to be sure the print head in the High-Resolution Printer is working properly.

1. Touch Print Test. The Print Test screen will be displayed.

2.Place a blank sheet(s) of paper in the input elevator.

3.Touch OK. The document(s) in the output tray will display the results of the print test.

Feed Direction

4.Remove the document(s) from the output tray and evaluate the appearance of the test pattern.

If the pattern is complete, you are ready to begin.

If the pattern is not legible:

Check to see that the printer cartridge is installed properly. Repeat the print test.

If the pattern is still not legible, clean the print head on the printer cartridge.

If the pattern is still not legible, replace the printer cartridge.

See the section entitled, “Troubleshooting” later in the manual for more information.

A-61591 / Part#9E8651 January 2008

9

Image 11
Contents Page Contents 61591 Part No E8651 January Rotation Rotation 270 rotation Configuring your print string 61591 / 9E8651 January Changing the horizontal print position Print Positions Omit printing on next document only Omit printing on more than one document Performing a Print test Installing a new printer cartridge 61591 / Part#9E8651 January Storing the printer cartridge when not in use Blue tab Supplies/Consumables CAT No Replacement procedures Replacing ink trays61591 / Part#9E8651 January Scanner auto purging Printer cartridge care Cleaning the print head To a dry print head TroubleshootingTroubleshooting