Storing the printer cartridge when not in use
6.Remove the protective tape from the bottom of the printer cartridge to expose the print head.
Print head
NOTE: The photo above is for illustrative purposes only. When removing the tape from the printer cartridge the print head should be facing down.
7.Place the new printer cartridge in the printer carrier and snap it into place.
8.Close the blue tab to hold the printer cartridge securely in place.
9.Close the print access cover and replace the output tray.
10.Run a print test.
The maintenance station is provided to store your printer cartridge when the
NOTE: The maintenance station can be mounted on the scanner for easy use and access.
1.Remove the printer cartridge from the scanner. See the procedures in the section entitled, “Installing a new printer cartridge”.
12 |
|