Kodak ESP7200, 1K5857 setup guide Connecting to a WPS wireless router

Page 4

Setting Up the Wireless (Wi-Fi) Connection

4. If the name of your network is:

 

Listed

 

Not Listed

 

 

 

 

 

 

Press

to select

Make sure your wireless router is turned on and within range. If your

your network, then

wireless router does not broadcast its SSID:

press OK.

a. Press

to select Unlisted network, then press OK.

 

 

b.Use the LCD keyboard to enter your network name.

c.Select WEP or WPA/WPA2 as required for your network's security setup, then press OK.

5.If your network has security enabled, use the LCD keyboard to enter your security string.

6.When the confirmation message appears, press OK.

If the printer is successfully connected, the Wi-Fi status light should be on.

If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking.

7.When the printer is successfully connected, install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup.

Connecting to a WPS wireless router

1.Press Home.

2.Press to select Network Settings, then press OK.

3.With WiFi Setup Wizard selected, press OK.

NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.

4.With WPS Connect selected, press OK.

5.Select one of these two methods of connecting:

IMPORTANT: Before you press OK on the printer, make sure you know where the router's button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router manufacturer’s documentation for more information.

Pressing a Button

 

Entering a PIN

 

 

 

 

 

 

a. With Push Button Configuration selected, press OK.

a. Press

to select Generate WPS

b. Press or select the WPS button for your wireless

PIN, then press OK.

router.

b. In your wireless router’s software,

NOTE: You will have two minutes to press or select the

locate the PIN screen.

WPS button. It may be a button on the device

c. Enter the PIN you received from

or a virtual button in the device’s software.

the LCD into the PIN screen.

 

 

 

6.When the confirmation message appears, press OK.

If the printer is successfully connected, the Wi-Fi status light should be on.

If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking.

7.When the printer is successfully connected, install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup.

3

www.kodak.com/go/aiosupport

Image 4
Contents Page Choosing a Connection Type Wireless Wi-Fi connectionEthernet connection Setting Up the Wireless Wi-Fi Connection Using the LCD keyboardConnecting to a non-WPS wireless router Before you connectConnecting to a WPS wireless router Setting Up the Ethernet Connection Connecting to an Ethernet networkEastman Kodak Company Rochester, NY