Pioneer Stereo Receiver Displays & Controls for VSX-D710S, VSX-D810S, and VSX-D850S Models

Displays & Controls

Display
1 2 3 4 5 6 7 8 9 0 -						=
SIGNAL SELECT	DIGITAL	SB	ATT DIRECT	MONITOR
DIGITAL DTS	PRO LOGIC DSP		MIDNIGHT	SP AB TUNED
ANALOG DIGITAL		DNR	LOUDNESS MONO		STEREO
						dB
	@				!	~

1SIGNAL SELECT indicators

Light to indicate the type of input signal assigned for the current component (see “Front Panel“, 0 SIGNAL SELECT). When the AUTO setting is being used on VSX-D810S & VSX-D850S receivers a set of brackets will appear around the SIGNAL SELECT indicators.

2DIGITAL : Lights when a DOLBY DIGITAL signal is played.

DTS: Lights when a source with DTS audio signals is played.

ANALOG : Lights when an analog signal is selected.

DIGITAL : Lights when a digital audio signal is selected.

[ ]: Lights when the AUTO setting is selected. (VSX-

D810S/D850S only)

2DTS indicator

Lights when DTS mode is being used.

3 2 DIGITAL indicator

When the 2(DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Digital signal. However, 2PRO LOGIC lights during 2 channel playback of Dolby Digital.

4 2 PRO LOGIC indicator

When the 2(DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Pro Logic source.

5DSP indicator

Lights when any Advanced Theater or DSP mode is selected.

6Surround Back indicator (VSX-D810S/D850S only) Lights when most Surround Back channel flag encoded (6.1channel) software is playing. (With some Surround Back channel software the surround back indicator won’t light because there is no flag encoded in the software.) If you play DTS 5.1/6.1 channel software surround sound will be heard whether it is encoded with a surround back channel flag or not.

7OVERLOAD indicator

This lights when an analog signal is too strong (the SIGNAL SELECT needs to be on ANALOG). It indicates the sound is distorting and the input signal should be reduced.

8ATT indicator

Lights when ATT is used to attenuate (reduce) the level of the input signal (can only be used in ANALOG mode).

9DIRECT indicator

Lights when source DIRECT is in use. This function bypasses all tone, channel levels, DSP and Dolby Surround effects.

MIDNIGHT indicator

Lights when MIDNIGHT listening mode is in use.

LOUDNESS indicator

Lights when the LOUDNESS is on. LOUDNESS is used to boost the bass and treble when listening at

low levels.

0SPEAKER indicator

Shows if the speaker system is on or not. SP 3A (and/or) B means speakers are switched on. SP 3 means speakers are switched off.

-MONITOR indicator

Lights when MONITOR is selected to hear a recording as it's being made (see page 34).

=TUNER indicators

MONO:

Lights when the mono mode is set using the MPX MODE button.

TUNED:

Lights when a broadcast is being received.

STEREO:

Lights when a stereo FM broadcast is being received in auto stereo mode.

~MASTER VOLUME LEVEL

Shows the overall volume level. Volume level is maintained even when the power is off. ---dBindicates the minimum level, and 0dB indicates the maximum level.

•Depending on the level settings you make for

individual channels, the MAX level can range between –10dB and 0dB.

!DNR indicator (VSX-D810S/D850S only)

Lights when the digital noise reduction is on. Use to

reduce extraneous noise. It can be used with any sound mode.

@CHARACTER display

Shows the radio frequency or function (DVD/LD, CD, etc.) receiver is using.

23

En