Controlling the Rest of Your System
3Use the @ # buttons to select the Full
Library Search mode.
The remote’s LCD display shows SEARCH.
4Press the MULTI CONTROL button for the component you want to control.
Each button can be set to control one of the following components
DVD | DVD/LD player or DVD Recorder |
TV | TV, Satellite tuner or Cable TV tuner |
VCR | VCR or Digital Video Recorder |
CD | CD player |
CD Recorder, Tape deck | |
| or MD player |
TVC | TV or Cable TV tuner |
TUN | FM/ AM tuner |
5Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the LED blinks during transmission.
If you see the component respond, by stopping (for playback components only) or switching off, go on to the step 6, otherwise repeat this step. After the ten codes have been sent the search icon blinks.
If you want to cancel the search mode, press and hold MUTING for two seconds.
6Switch the component back on or restart playback.
7Use the % fi buttons to scan through the last 10 codes transmitted to identify the correct code.
The transmission icon is on while the codes are sent out. Stop when you see the component stop or switch off. The LCD display shows the I.D.
You can also verify you have the correct code by pressing PLAY, STOP., VOL
8Press and hold ENTER for three seconds to save the preset code.
Setting Up Using Brand Name Search (VSX-D850S only)
An alternative method of setting up the remote with preset codes is to use the Brand Search feature. The remote transmits batches of 10 codes; when you see the component responding you just scan through those last 10 codes until you find the correct one.
2Press and hold SETUP for three seconds.
The remote’s LCD display shows SETUP.
The remote control will also return to the previous mode after thirty seconds of inactivity.
3Use the @ # buttons to select the Brand
Search mode, then press ENTER.
The remote’s LCD display shows BRAND SEARCH.
4Press the MULTI CONTROL button for the component you want to control.
Each button can be set to control one of the following components
DVD | DVD/LD player or DVD Recorder |
TV | TV, Satellite tuner or Cable TV tuner |
VCR | VCR or Digital Video Recorder |
CD | CD player |
CD Recorder, Tape deck | |
| or MD player |
TVC | TV or Cable TV tuner |
TUN | FM/ AM tuner |
5Use the % fi buttons to select the brand of the component.
The brand names appear in the remote’s LCD display. If the brand of your component doesn’t appear then you can’t use this feature.
6Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the transmission icon is on while the codes are sent out. After all ten codes have been sent the search icon blinks.
If you see the component respond, by stopping (for playback components only) or switching off, go on to the step 6, otherwise repeat this step.
If you want to cancel the search mode, press and hold MUTING for two seconds.
7Switch the component back on or restart playback.
8Use the % fi buttons to scan through the last 10 codes transmitted to identify the correct code.
The transmission icon is on while the codes are sent out. Stop when you see the component stop or switch off. The display shows the I.D.
You can also verify you have the correct code by pressing PLAY, STOP., VOL
9Press and hold ENTER for three seconds to save the preset code.
1Switch on the component you want to control.
If the component is some kind of player (CD player, VCR, etc.), then start it playing.
37
En
