Pioneer VSX-D810S DSP button see pages 28, Test Tone button see, Signal Select see, Muting button

Displays & Controls

6 2 /DTS button (see pages 27, 29)

Use to put receiver in DOLBY DIGITAL, DOLBY SURROUND and DTS modes.

DSP button (see pages 28, 30)

Use to put receiver in one of the DSP modes.

TEST TONE button (see page 21)

Use to sound the TEST TONE when setting up the surround sound of the receiver (the 2/DTS mode must be on).

SIGNAL SELECT (see page 29)

Use to select the proper signal (analog, digital) for the source your are inputting. On the VSX-D810S & VSX-D850S receivers there is an AUTO setting. In this setting the receiver will automatically switch between the analog and digital signals according to what is being input. If both signals are input the AUTO setting will choose the digital one. This setting is convenient as the receiver will always choose the best or appropriate signal.

7CH SELECT button (see page 21)

Use to select a speaker when setting up the surround sound of the receiver. To use first press the RCV button then operate this button.

CH LEVEL +/– (see page 21)

Use to set up the levels of the surround sound of the receiver. To use first press the RCV button then operate this button.

FUNCTION button

Use to select the playback or recording source. This button lets you cycle through the different functions of the receiver in the following order: CD, TUNER, AUX, CDR/TAPE, VCR/DVR, DVD/LD, DVD 7.1 Ch, VIDEO, and TV/SAT (VSX-D810S/D850S).

CD, TUNER, AUX, CDR/TAPE, VCR/DVR, DVD/LD, VIDEO, and TV/SAT (VSX-D710S).

8LOUDNESS button

Use to switch on the loudness. This feature is useful for getting good bass and treble sounds listening at low volumes.

FL DIMMER button

Use this button to make the fluorescent display (FL) dimmer or brighter. There are three brightness settings as well as an off setting.

SETUP button (see page 35-40)

Use this button when setting up the remote control to control other components.

MUTING button

Use to mute the sound or restore the sound if it has been muted.

9THE FOLLOWING BUTTONS ARE DEDICATED TV CONTROL. THEY ARE ONLY USED FOR CONTROLLING YOUR TV.

TV FUNC button

Use select the TV function.

TV button

Use to turn on/off the power of the TV.

TV VOLUME +/– buttons

Use to adjust the volume on your TV.

0MENU button

Use to access different menus associated with your DVD player.

-MASTER VOLUME +/– buttons

Use to set the overall listening volume.

=CHANNEL +/– buttons

Use to select the stations of memorized radio frequencies. Also use to skip tracks backward or forward on CDs, DVDs, etc.

~@ # % fi ( TUNE/ST +/–) & ENTER buttons (see pages 16-21)

Use these arrow buttons when setting up your surround sound system (see pages 16-21). These buttons are also used to control DVD menus/options

and for deck 1 of a double cassette deck player. The TUNE/ST +/– buttons can be used to find radio frequencies and preset stations, respectively.

!DISC (ENTER) button

Use to select a disc an in multi-CD player. To use first press the RCV button then operate this button.

@RECEIVER (POWER) button

This switches between STANDBY mode and power

ON for this receiver.

#LED DISPLAY (see pages 35-40)

This display flashes when a command is sent from the remote control to the receiver. It also flashes at other times, for example when teaching the receiver preset codes, with specific meanings.

25

En