Pioneer VSX-D810S, VSX-D850S, VSX-D710S manual Introductory Information

01Introductory Information

Checking the Supplied

Accessories

Please check that you've received the following supplied accessories:

•AM loop antenna

•FM wire antenna

•Dry Cell Batteries x2 (VSX-D710S/D810S : type AA IEC R6P) (VSX-D850S : type AA IEC LR6)

•Remote Control Unit

•Operating Instructions

Using this Manual

This manual is for the VSX-D710S/D810S/D850S audio/ video multi-channel receivers.

It is divided into two main sections:

Set up

This section covers installing your receiver and connecting up all the other components in your home theater system to it. It also describes how to set up a multi-channel speaker system to take full advantage of the great surround sound features of your receiver.

Operation

This section shows you how to use every feature of the receiver and its remote control unit. It also covers using the supplied remote control to operate your other home theater components. To find out more about a specific button, control or indicator, see Displays & Controls starting on page 22. This will point you to the relevant chapter in the manual.

In the Additional Information section (p.50-51) you'll find a troubleshooting section and specifications.

Installing the Receiver

Please note:

•Do not place objects directly on top of this unit. This would prevent proper heat dispersal.

•When installing in a rack, shelf, etc., be sure to leave more than 8 inches (20 cm.) of space above the receiver.

Loading the Batteries

Dry Cell Batteries ⋅ 2

CAUTION:

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

•Never use new and old batteries together.

•Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

•Batteries of the same shape may have different voltages. Do not use different batteries together.

•When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country or area.

Operating Range of Remote Control Unit

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver's remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control unit.

When Making Cable

Connections

Be careful not to arrange cables in a manner that bends the cables over the top of this unit. If the cables are laid on top of the unit, the magnetic field produced by the transformers in this unit may cause a humming noise to come from the speakers.

4

30

30

23ft (7m)

En