Kodak 3.1 manual Safety information

Page 91

KODAK HERO 3.1 All-in-One Printer

Safety information

KODAK HERO 3.1 All-in-One Printers are Class 1 LED Products.

•Always follow all warnings and instructions marked on the product.

•Use only the power source indicated on the product regulatory label.

•Use only the power cord that comes with the product (or an approved power cord greater or equal to H05W-F, 3G, 0.75mm2). Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.

•If you do not use this product for a long period of time, unplug it from the electrical outlet.

•Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.

•Do not allow the power cord to become damaged or frayed.

•If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.

•Place the product on a flat, stable surface that extends beyond the product’s base in all directions. This product will not operate properly if tilted or at an angle.

•When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).

•Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight.

•Leave enough room around this product for sufficient ventilation.

•Do not block this product’s covers or openings, or insert any objects through slots.

•Do not use aerosol products inside or around this product.

•Do not spill any liquid on this product.

•Do not attempt to repair or service this product.

•If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.

www.kodak.com/go/aiosupport

86

Page 90 Page 92
Image 91
Page 90 Page 92
Contents Extended User Guide Kodak HeroPage Table of contents Maintaining Your Printer Mobile PrintingCopying ScanningProduct and Safety Specifications TroubleshootingComponents Printer OverviewControl panel Feature DescriptionHome Center Software Ordering supplies Configuring printer settings Networking Your Printer Connecting to a wireless networkBefore you connect Connecting to a non-WPS wireless router Listed Not listed With Push Button Configuration Connecting to a WPS wireless routerPressing a button Entering a PIN Setting up an IP Address Using the LCD keyboardDynamic Dhcp Manual Static Viewing the network configurationSelect Yes, my printer is listed, then click Next Printing the network configurationConnecting to another Kodak All-in-One Printer Select No, my printer is not listed, then click NextOn a computer with MAC OS Select Apple System Preferences Changing from USB to a wireless connectionIf your printer is connected to a computer with Windows OS If your printer is connected to a computer with MAC OS Online Printer Management Tool Directly from Home Center Software v7.x or higher Accessing the Online Printer Management ToolOn any printer-supported computer Adding a Google Cloud Print Account Using the Online Printer Management ToolClick Register Printer Editing a Google Cloud Print Account Click Claim Printer NowClick Sign in with Google Adding a Kodak Email Print Service AccountClick Send Test Email to Google Account Paper types Handling PaperPaper sizes Loading paper Envelope sizesLoading plain paper Handling Paper Kodak Hero 3.1 All-in-One Printer Loading photo paper Move the paper-edge guides until they touch the paper Loading envelopes Kodak Hero 3.1 All-in-One Printer Printing documents PrintingPrinting two-sided documents Printing two-sided documents from a computer with MAC OS Printing forms from the control panelViewing pictures on a memory card Printing picturesFinding pictures on a memory card Printing from a memory card Using default settings to print a pictureChanging the settings and printing pictures Settings Description Print Size Printing panoramic pictures Printing tagged pictures Zooming and cropping pictures Transferring pictures to a computer Printing from a wireless deviceTransferring pictures to a computer with Windows OS Transferring pictures to a computer with MAC OS Printing from an iPhone, iPad, or iPod touch Device Mobile PrintingPrinting from a Blackberry Device Printing from an Android OS Device Copying Using the default settings to copy a documentCopying a document Copy Document Setting Description Adjusting the settings and copying a documentCopy Document Setting Description Option Changing the number of copies of a document Enlarging or reducing a document Darkening or lightening a document Copying a photo Using the default settings to copy a photoCopy Photo Option Setting Description Adjusting the settings and copying a photoSetting Description Changing the number of copies of a photo Enlarging or reducing a photo Darkening or lightening a photo Before you begin scanning ScanningSetting Options Scanning Scanning to a computer Scanning from the control panelScan Settings Description Option Scanning to a Memory Card Scan Option Settings DescriptionScan Option Settings Description Scanning from the computer Scanning multiple pictures simultaneously Click Printer Scan Settings, then select the Picture tabMaintaining Your Printer General care and cleaningCleaning the scanner glass and document backing Kodak Hero 3.1 All-in-One Printer Replacing ink cartridges Kodak Hero 3.1 All-in-One Printer Maintaining Your Printer Replacing the printhead Maintaining Your Printer Kodak Hero 3.1 All-in-One Printer Maintaining Your Printer Kodak Kodak AiO Printer Tools To update the softwareTo update the firmware Updating the software and printer firmwareChecking ink levels Monitoring and adjusting printer performanceClick Check for Software Updates Click Check for Printer Firmware UpdatesResetting factory defaults To select View Network Configuration, then press OK TroubleshootingBasic troubleshooting Problem Possible SolutionsPrint quality Getting help on the Web For more troubleshooting informationStatus lights Power lightWi-Fi connectivity LED Power light What it meansCopy document features Product and Safety SpecificationsSpecifications and features Photo printing featuresInk cartridges Copy photo featuresScanning features Paper input tray featuresSoftware support Physical specificationsWarranty ConnectivityPaper types supported System requirementsComputer with Windows OS Computer with MAC OSPaper sizes supported Safety information Ink cartridge safety LCD screen safetyFCC statement Regulatory complianceIndustry Canada IC Radiation Exposure Statement Canadian statementsEuropean compliance statement German compliance statementEnergy Star Qualified All-in-One Printer Warranty Information Declaration of Conformity

3.1 specifications

Kodak 3.1 is a prominent imaging technology launched by Eastman Kodak Company, known for its substantial advancements in the realm of digital photography and videography. The system features an array of improvements that enhance the overall quality and efficiency of image capture and processing.

One of the main features of Kodak 3.1 is its high-resolution imaging capabilities, allowing users to capture stunning images with remarkable detail and clarity. With resolutions exceeding the standards set by previous generations, Kodak 3.1 ensures that both professional photographers and hobbyists can produce high-quality prints and digital outputs.

The technology is built upon advanced image sensor technology, which incorporates larger pixels to collect more light, thereby improving low-light performance. This results in vivid colors and reduced noise in photographs taken in challenging lighting conditions. Additionally, Kodak 3.1 employs a sophisticated image processing algorithm that enhances dynamic range and maintains details in both highlights and shadows.

In terms of usability, Kodak 3.1 introduces a user-friendly interface, making it accessible for individuals of all skill levels. The intuitive navigation system allows users to swiftly adjust settings and access features without unnecessary complications. Furthermore, it boasts a range of automated shooting modes that adapt to various environments, ensuring optimal results regardless of the situation.

Another significant characteristic of Kodak 3.1 is its seamless integration with cloud storage solutions. Users can effortlessly upload images to the cloud, facilitating easy access and sharing across different platforms. This feature aligns with contemporary trends where photographers value connectivity and the ability to showcase their work online.

Kodak 3.1 also emphasizes sustainability, utilizing energy-efficient components and materials. This commitment to eco-friendliness sets it apart in a market increasingly focused on reducing environmental impact.

In summary, Kodak 3.1 represents a remarkable evolution in imaging technology, combining high-resolution capabilities, advanced image processing, user-friendly interfaces, and connectivity features. Its characteristics make it a versatile choice for those seeking to elevate their photography skills and produce professional-quality images. As Kodak continues to innovate, 3.1 stands as a testament to its legacy in the imaging industry.
Top Page Image Contents