NEC 5800/320MA manual Adding Ethernet PCI Adapters to a Team

Configuring Ethernet PCI Adapters

Adding Ethernet PCI Adapters to a Team

N O T E

Add Ethernet PCI adapters to only one team at a time. Complete the procedure before adding an adapter to another team.

1.Start the PROSet utility if you have not already done so (see “Starting PROSet” on page 2-7).

2.In the left pane of the Intel(R) PROSet for Wired Connections dialog box, right-click the appropriate team. In the menu that appears, click Add Adapter to Team, then select the adapter you want to add to the team.

Repeat this step for any adapters you want to add to the team.

Figure 2-18shows an example of adding a U574 PCI adapter to a team.

Figure 2-18. Adding an Adapter to a Team

3.If necessary, you can manually designate new primary and secondary adapters for the team. See step 7 of “Creating Ethernet Teams” on page 2-18.

(If you have not previously selected primary or secondary adapters for the team, PROSet will automatically designate adapters to fill these roles.)

4.Click Apply to process and save the changes.

Ethernet PCI Adapters 2-31