Updating the Driver for Optical Fibre Channel PCI Adapters
To update the driver using Device Manager
1.Access Device Manager. For example:
a.On the Start menu,
b.In the left pane of Computer Management, under System Tools, click Device Manager.
2.In Device Manager, expand SCSI and Raid Controllers.
3.In the list of adapters,
4.In the Properties window, click the Driver tab; then click Update Driver.
5.Follow the instructions in the Hardware Update Wizard until the Install from a list or specific location option is displayed. Click this option to select it, then click Next.
6.Click Don’t search. I will choose the driver to install, then click Next.
7.In the Select a Device Driver window, click Have Disk.
8.Browse to the location where you saved the QLogic driver and select the file that is discovered (oemsetup.inf). Then, click Next. Windows installs the driver.
9.Click Finish to complete the installation. Repeat steps 3 through 9 to update the driver for the second adapter.
10.Reboot the system.
11.In either Device Manager or ftSMC, verify that the driver is loaded. For information about ftSMC, see the Express5800/320Ma: System Administrator’s Guide.
To check the driver using Device Manager
1.Access Device Manager. For example:
a.On the Start menu,
b.In the left pane of Computer Management, under System Tools, click Device Manager.
2.In Device Manager, expand SCSI and Raid Controllers.
3.In the list of adapters,
4.In the Properties window, click the Driver tab. Then, click Driver Details.