Winegard RoadTrip SDi guide

Operation RoadTripTMSD (VEHICLE MUST BE STATIONARY!!)

1.Turn on receiver and television set. The

RoadTrip™ must be connected to a receiver that is plugged into 120 VAC.

2.Verify that you are getting the receiver’s menu screens on the television. These screens are avail- able with or without the dish finding the signal.

3.Turn the power switch on for the RoadTrip™. The dish will detect if it is already on a satellite sig- nal. If it detects a signal, the dish will move to check it’s alternate satellite and then move back to the original satellite signal that is on.

4.If no signal was detected, the dish will begin its search to locate the primary satellite. Once the dish locates a signal, it will pause long enough to iden- tify which satellite it has located. This may or may not be visible on your receiver’s point dish screen.

5.After the unit has verified that it has the correct satellite, it will move to check the alternate satellite and move back to the primary satellite to complete the search routine.

6.If you do not have signal, see Troubleshooting, p.7.

NOTE: Because the RoadTrip™ uses information from the last location that it was on a signal, sat- ellite acquisition may take longer if the dish is inactive over long distance traveling.

DirecTV® must be set to the “two” satellite, oval dish setting. Refer to your receiver manual.

DISH Network® receivers must have the check switch set to “SW42”. See page 6.

RoadTrip SDi, RoadTrip SD specifications

The Winegard RoadTrip series is renowned for its innovative satellite antenna solutions, particularly the RoadTrip SD and RoadTrip SDi models, designed specifically for RV and mobile lifestyle enthusiasts. These products embody the desired combination of performance, durability, and user-friendly technology, making them top choices for satellite television viewing while on the go.

One of the key features of the RoadTrip SD model is its design that supports multiple satellite services, including DIRECTV, Dish Network, and the newly launched streaming services. The RoadTrip SDi enhances this capability, providing even greater flexibility for satellite dish service options, allowing users to effortlessly switch between providers according to their needs. This versatility ensures that RV owners can stay connected to their favorite channels no matter where their travels take them.

Both models feature automatic satellite acquisition technology, which allows for quick and easy setup. Users can simply power on the device, and it will automatically locate the correct satellite signal without the need for manual adjustments. This feature significantly reduces setup time, letting users get back to their adventures without delay.

The RoadTrip SD and SDi antennas are built for durability and performance, designed to withstand the rigors of various travel conditions. Their robust construction ensures that they can endure the elements, a crucial factor for recreational vehicle use. Additionally, the antennas have a low profile and sleek design, minimizing wind resistance while driving.

Connectivity is another crucial aspect of these devices. Both models are compatible with high-definition programming, ensuring that users enjoy crisp and clear visuals during their viewing experience. The SDi model takes connectivity further with the inclusion of built-in Wi-Fi capabilities, allowing users to access online streaming services and browse the internet, enhancing the entertainment possibilities on the road.

In conclusion, the Winegard RoadTrip SD and SDi models exemplify cutting-edge technology and user-friendly features aimed at enhancing the mobile entertainment experience. With their automatic satellite acquisition, dual-service compatibility, and advanced connectivity options, these antennas cater to the needs of diverse travelers, making them an essential addition to any RV setup.