NEC LCD2170NX, LCD2070VX user manual Monitor MultiSync Specifications

				Specifications
Monitor		MultiSync®
Specifications		LCD2070NX		Notes
LCD Module	Diagonal :	20.1 inch		Active matrix; thin film transistor (TFT)
	Viewable Image Size :	20.1 inch		liquid crystal display (LCD); 0.255 mm
	Native Resolution			dot pitch; 250cd/m2 white luminence;
	(Pixel Count) :	1600 x1200		700:1 contrast ratio, typical
Input Signal	Video :	ANALOG 0.7 Vp-p/75 Ohms		Digital Input: DVI-D
	Sync :	Separate sync. TTL Level Positive/Negative
		Composite sync. Positive/Negative
		Composite Sync on Green (0.3Vp-p nega-
		tive and 0.7Vp-p positive)
Display Colors		16,777,216		Dependent on display card used.
Maximum Viewing	Left/Right :	88°/88°	(CR>10)
Angles	Up/Down :	88°/88°	(CR>10)
Synchronization	Horizontal :	31.5 kHz to 91.1 kHz		Automatically
Range	Vertical :	56.0 Hz to 85.0 Hz		Automatically
Resolutions		720 x 400*1 :VGA text		Some systems may not support all
Supported		640 x 480*1 @ 60 Hz to 85 Hz		modes listed.
		800 x 600*1 @ 56 Hz to 85 Hz
		832 x 624*1 @ 75 Hz
		1024 x 768*1 @ 60 Hz to 85 Hz
		1152 x 864*1 @ 75 Hz
		1152 x 870*1 @ 75 Hz		NEC DISPLAY SOLUTIONS
		1280 x 960 @*1 @ 75 Hz		cites recommended resolution
		1280 x 1024*1 @ 60 Hz to 85 Hz		at 60 Hz for optimal display
		1600 x 1200 @ 60 Hz......................... performance.
Active Display Area	Horizontal :	408 mm/16.1 inches
	Vertical :	306 mm/12.0 inches
USB Hub	I/P :	USB Specification Revision 2.0
	Port :	Upstream 1
		Downstream 4
	Load Current :	Maximum 0.5A per port
Power Supply		100 – 240 V~ 50/60 Hz
Current Rating		1.25 - 0.70 A
Dimensions		442 mm (W) x 388.5-498.5 mm (H) x
		220.0 mm (D)
		17.4 inches (W) x 15.3-19.6 inches (H) x
		8.7 inches (D)
Weight		8.6 kg
		19.0 lbs
Environmental	Operating Temperature :	5°C to 35°C/41°F to 95°F
Considerations	Humidity :	30% to 80%
	Altitude :	0 to 12,000 Feet
	Storage Temperature :	-10°C to 60°C/14°F to 140°F
	Humidity :	10% to 85%
	Altitude :	0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

17