NEC LCD1980FXI manual Nec-Mits

Page 2

All of these control capabilities are made possible using the advanced remote diagnostics and remote control capabilities of the Display Data Channel/Command Interface (DDC/CI). This allows control commands to be sent directly to the monitor by the local system or remotely over an existing network (LAN) by a system administrator. In order to take full advantage of these benefits, users must use a DDC/CI-compatible graphics card and be running Windows 2000/XP.

Also controlled through the Advanced OSM is TileMatrix, which allows you to build video walls of various configurations. With the use of a simple video amplifier and a standard video card, this feature saves you time and money compared to other connection solutions. With the ability to utilize up to 25 monitors (5 x 5 configuration) that display a shared image, you can build an impressive video wall for various applications, including advertising and tradeshows. TileComp works in tandem with TileMatrix to compensate for the width of tiled bezels and optimally display still images.

Another user-controlled feature offered by the Advanced OSM is AutoBright, which adjusts the brightness level based on the image content on the screen. This function delivers optimal readability and reduced user eyestrain, as well as conserves energy, contributing to a lower total cost of ownership.

Wide compatibility for today and tomorrow. Ambix+™ technology provides the widest range of computer video compatibilities between analog and digital systems by allowing the same monitor to work seamlessly in either environment. The DVI-I connector provides digital or analog input, the DVI-D connector provides digital-only input, and a third input is provided with a traditional 15-pin VGA connector, which allows for legacy analog-only connection. This tripleinterface architecture provides a number of single and dual-input configurations.

Hassle-free display setup. With Advanced No Touch Auto Adjust, the MultiSync LCD1980FXi not only provides for an optimal image upon initial power-on but can also detect closed signal changes even if it runs under the same resolution and refresh rate, as is the case with external signal switch boxes. This results in a more stable image after switching. This model also features auto DVI cable detection, which, upon power-up of your computer system, allows it to identify which signal cable (analog or digital) is attached to the monitor’s DVI-I connector. This technology eliminates many manual setup steps and assures that your system and monitor configuration are achieving optimal performance.

Intelligent power management ensures a smart investment. Using approximately 50% less power and emitting less heat than comparable CRT monitors, the MultiSync LCD1980FXi allows you to conserve energy and lower your total cost of ownership. Many technologies contribute to these savings, including the automatic power-off timer, which can be set from 1-24 hours via the on-screen display. If users forget to turn off their monitors, this function will turn them off automatically after a user-determined period of time, thereby reducing electrical power costs. The high-efficiency backlight, which provides the longest lifetimes of any NEC LCD monitor, reduces not only the power consumption but also the heat generation at the front of the screen.

OSM is a registered trademark, and Advanced No Touch Auto Adjust,

NEC Display Solutions of America, Inc.

AmbiBright, Ambix+, AutoBright, GammaComp, NaViSet, Rapid Motion,

500 Park Boulevard, Suite 1100

Rapid Response, TileMatrix, TileComp, XtraView+, are trademarks of

Itasca, IL 60143

NEC Display Solutions of America, Inc. ENERGY STAR is a U.S. registered

888-NEC-MITS

trademark. All other brand or product names are trademarks or

www.necmitsubishi.com

registered trademarks of their respective holders.

 

©2005 NEC Display Solutions of America. 3/05 ver.1.

 

Model

Display

Viewable Image Size

Pixel Pitch

Pixels Per Inch

Brightness (typical)

Contrast Ratio (typical)

Viewing Angle (typical)

Response Time (typical)

Display Colors

Synchronization Range

Horizontal

Vertical

Input Signal

Video

Sync

Input

Resolutions Supported

Native Resolution

Additional Features

Touch/Protective Glass-Capable

Voltage Rating

Power Consumption (typical)

On

Power Savings Mode

Dimensions (W x H x D)

Net (with stand) Net (without stand)

Weight

Net (with stand) Net (without stand)

VESA Hole Configuration Specs.

Environmental Considerations

Operating Temp.

Operating Humidity

Operating Altitude:

Storage Temp.

Storage Humidity

Storage Altitude:

Limited Warranty

Technical Support

NEC MultiSync LCD1980FXi

19"/48.2 cm 0.294mm

86 @ native resolution

270cd/m2 600:1

178° Vert., 178° Horiz. (89U/89D/89L/89R) Rapid Response (18ms)

16.77 million

31.5- 81.1 kHz

50 - 85 Hz

Analog 0.7 Vp-p/75 Ohms

Separate Sync: TTL Level (positive/negative)

Composite Sync: TTL Level (positive/negative)

Composite Sync on Green (0.3 Vp-p negative 0.7 Vp-p positive)

DVI-I, DVI-D and VGA 15 pin D-sub

Analog/Digital:

720 x 400 @ 70 - 85 Hz

640 x 480 @ 60 - 85 Hz

800 x 600 @ 56 - 85 Hz

832 x 624 @ 75 Hz

1024 x 768 @ 60 - 85 Hz

1152 x 864 @ 70 - 85 Hz

1152 x 870 @ 75 Hz

1280 x 960 @ 60 Hz

1280 x 1024 @ 60 - 75 Hz

1280 x 1024 @ 60 Hz

Ultra-thin-frame (bezel), GammaComp, TileMatrix, TileComp, XtraView+ wide-angle viewing technology, Ambix+ technology, Advanced No Touch Auto Adjust, AutoBright, CableComp, power-off timer, black level adjustment, AmbiBright, digital smoothing, digital controls, OmniColor 6-axis color control sRGB, Plug and Play (VESA DDC2B & 2Bi), VESA DPMS power management, ISO 13406-2 Class II, vacation switch, optional MultiSync SoundBar 80, height-adjustable stand, Rapid Motion

Designed for integration

Universal 100 (110-240V) 50-60 Hz internal

48W

<2W

402.3x 364.8 x 200mm / 15.8 x 14.4 x 7.9 in.

402.3x 330.3 x 77.5mm / 15.8 x 13 x 3.1 in.

21.4lbs/9.7 kg

13.9lbs/6.3 kg

100mm x 100mm

5-35°C/41-95°F

30-80%

3048 m/10,000 ft -10-60°C/14-140°F 10-85%

12,192 m/40,000 ft

3 years parts and labor, including backlight

24 hours/7 days

NOTE: Technical specifications are subject to change without notice.

Image 2
Contents Multisync lcd1980FX TM ProfessionalNEC-MITS