NEC LCD2060NX Raise and Lower Monitor Screen, Tilt and Swivel, Remove Monitor Stand for Mounting

Page 6

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Note: Handle with care when raising or lowering the monitor screen.

Figure RL.1

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Note: Handle with care when tilting the monitor screen.

Figure TS.1

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Lay down the unit with caution and face down the screen of the unit on a flat material (Figure S.1).

2.Gently put the Height Adjustment up about 30 degrees (Figure S.2).

English

Figure S.1

Figure S.2

3.Remove two pieces of plastic parts. Use your fingers to push them a little bit away from the stand (A). Then push them to the top direction (B) (Figure S.3).

Figure S.3

4. Unscrew the pair of “1” and “2” screws sequentially (Figure S.4).

Figure S.4

English-5

Image 6
Contents MultiSync LCD2060NX Declaration English-1Canadian Department of Communications Compliance Statement For the Customer to use in U.S.A. or CanadaDeclaration of Conformity FCC InformationContents Quick StartFigure A.1 English-4Remove Monitor Stand for Mounting Raise and Lower Monitor ScreenTilt and Swivel English-5GS mark English-6OSM On-Screen-Manager Controls Auto Adjust Analog input onlyControls Brightness/Contrast ControlsColour Control Systems ToolsEnglish-8 Information OSM WarningEnglish-9 Safety Precautions and Maintenance Recommended useEnglish-10 Ergonomics English-11Specifications Monitor Specifications MultiSync LCD2060NX MonitorEnglish-12 Features English-13Troubleshooting TCO’03 Congratulations English-15Mode Power consumption LED colour Manufacturer’s Recycling and Energy InformationEnglish-16