NEC LCD2060NX user manual GS mark, English-6

Page 7

Figure S.5

NOTE: This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g.

GS mark).

Replace screws

Thickness of bracket (arm)

2.0 ~ 3.2 mm

Tighten all screws

100 mm

4 SCREWS

(MAX depth: 8.0mm) If use other screw, check depth of hole.

Weight of LCD assembly: 6.9kg (MAX)

English-6

Image 7

Contents MultiSync LCD2060NX English-1 DeclarationFCC Information For the Customer to use in U.S.A. or CanadaDeclaration of Conformity Canadian Department of Communications Compliance StatementQuick Start ContentsEnglish-4 Figure A.1English-5 Raise and Lower Monitor ScreenTilt and Swivel Remove Monitor Stand for MountingEnglish-6 GS markBrightness/Contrast Controls Auto Adjust Analog input onlyControls OSM On-Screen-Manager ControlsTools Colour Control SystemsEnglish-8 OSM Warning InformationEnglish-9 Recommended use Safety Precautions and MaintenanceEnglish-10 English-11 ErgonomicsMonitor Specifications MultiSync LCD2060NX Monitor SpecificationsEnglish-12 English-13 FeaturesTroubleshooting English-15 TCO’03 CongratulationsManufacturer’s Recycling and Energy Information Mode Power consumption LED colourEnglish-16