NEC LCD1990FXp user manual Manager Period of inactivity. The IPM has two settings, English-18

Tag4	Color Control	Colour Control System: Six colour presets select the desired colour setting (sRGB and
		NATIVE colour presets are standard and cannot be changed).
		R,G,B: Increases or decreases Red, Green or Blue colour depending upon which is
		selected.
		NATIVE: Original colour presented by the LCD panel that is unadjustable.
		sRGB: sRGB mode dramatically improves the colour fidelity in the desktop environment by
		a single standard RGB colour space. With this colour supported environment, the operator
		could easily and confidently communicate colour without further colour management
		overhead in the most common situations.
Tag5	DVI Selection	This function selects the DVI input mode. When the DVI selection has been changed, you
		must restart your computer. Press ÒLeftÓ or ÒRightÓ to select.
		DIGITAL: DVI digital input is available.
		ANALOG: DVI analog input is available.
	Video Detect	Selects the method of video detection when more than one computer is connected.
		Press ÒLeftÓ or ÒRightÓ to select.
		FIRST: The video input has to be switched to ÒFIRSTÓ mode. When current video input
		signal is not present, then the monitor searches for a video signal from the other video
		input port. If the video signal is present in the other port, then the monitor switches the
		video source input port to the new found video source automatically. The monitor will not
		look for other video signals while the current video source is present.
		NONE: The Monitor will not search the other video input port unless the monitor is
		turned on.
	Off Timer	Monitor will automatically turn off after the preset time period from power on with the
		ON/OFF function. When you select ÒONÓ, press ÒSELECTÓ and ÒLeftÓ or ÒRightÓ to adjust.
		Before powering off, a message will appear on the screen asking the user if they want to
		delay the turn off time by 60 minutes. Press any OSM button to delay the turn off time.
	IPM (Intelligent Power	The Intelligent Power Manager allows the monitor to enter into a power saving mode after
	Manager)	a period of inactivity. The IPM has two settings.
		STANDARD: Monitor enters power save mode automatically when the input signal is lost.
		OPTION: Monitor enters power save mode automatically when the amount of surrounding
		light goes below the level that is determined by the user.
	IPM Setting	Adjusts the ÒilluminanceÓ value for IPM.
	LED Brightness	Controls the brightness of the LED on the monitor.
	LED Color	The LED on the front can be blue or green.
	Screen Saver Motion	Use the SCREEN SAVER to reduce the risk of image persistence.
		Screen image is moves periodically in 4 directions in order to reduce the risk of image
		retention. Screen image can be set to move periodically in intervals from 10 to 900
		seconds in 10 seconds increments.
	Hot Key	When this function is activated; the brightness and contrast of the monitor can be adjusted
		without entering the OSM menu by using the front buttons.
		The ÒLeftÓ or ÒRightÓ buttons adjust the brightness level.
		The ÒDownÓ or ÒUpÓ buttons adjust the contrast level.
	Factory Preset	Selecting Factory Preset allows you to reset all OSM control settings back to the factory
		settings. Highlighting the control to be reset and pressing the RESET button can reset
		individual settings.
Tag6	Language	OSM control menus are available in eight languages. Press ÒLeftÓ or ÒRightÓ to select.
	OSM H. Position	You can choose where you would like the OSM control image to appear on your screen.
		Selecting OSM Location allows you to manually adjust the position of the OSM control
		menu left or right.
	OSM V. Position	You can choose where you would like the OSM control image to appear on your screen.
		Selecting OSM Location allows you to manually adjust the position of the OSM control
		menu up or down.
	OSM Turn off	The OSM control menu will stay on as long as it is use. You can select how long the
		monitor waits after the last touch of a button to shut off the OSM control menu. The preset
		choices are 10-120 seconds by 5 seconds step.

English-18