Color Control Systems, Tools, Expansion | NEC LCD2690WUXi specification

For the MAC with digital output: Before turning on the MAC, the DVI Input mode must be set to DIGITAL in ÒDVI SELECTIONÓ of OSM by pressing ÒSELECTÓ button then ÒCONTROLÓ button when the DVI signal cable is connected to the DVI-I connector (DVI-I) of the monitor. Otherwise the MAC may not turn on.

Depending on the PC and Video card used, or when another Video signal cable is attached, this function may not operate.

AUTO FINE (Analog input only)

This function automatically and periodically adjusts the ÒFINEÓ setting for change in signal condition. This function adjusts approximately every 33 minutes.

EXPANSION

Sets the zoom method.

FULL: The image is expanded to 1920 x 1200, regardless of the resolution.

ASPECT: The image is expanded without changing the aspect ratio.

OFF: The image is not expanded.

CUSTOM: Refer to the ADVANCED OSM Controls menu section of the userÕs manual for detailed instructions.

Color Control Systems

Colour Control Systems: Seven preset colour settings.

For preset settings 1, 2, 3 and 5, the following levels can be adjusted:

TEMPERATURE: Adjust the white temperature by increasing or decreasing this setting. A lower colour temperature will make the screen reddish and a higher colour temperature will make the screen bluish.

WHITE (White Balance): If TEMPERATURE needs further adjustment, the individual R/ G/ B/ levels of the white point can be adjusted. To adjust the R/G/B levels, CUSTOM must be showing as the TEMPERATURE selection. HUE: Adjusts the hue of each colour*1. The change in colour will appear on screen and the menu colour bars will show the amount of adjustment.

SATURATION: Adjusts the colour depth of each colour*1. Press the ÒRIGHTÓ button and the colour vividness increases.

OFFSET: Adjusts the colour brightness of each colour*1. Press ÒRIGHTÓ button and the colour Brightness increases.

*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.

NATIVE, sRGB: Original colour presented by the LCD panel that is unadjustable.

PROGRAMMABLE: The colour tone that was set up with the downloaded application software is reflected.

NOTE: To reset a poor image setting, turn on the monitor by using front power button while holding ÒRESETÓ and ÒSELECTÓ buttons at the same time.

Tools

SHARPNESS

This function is digitally capable to keep crisp image at any timings. It is continuously adjustable to get distinct image or soft one as you prefer, and set independently by different timings.

DVI SELECTION

This function selects the DVI input mode (DVI-I). When the DVI selection has been changed, the computer has to be restarted.

AUTO: By using the DVI-D to DVI-D cable, the DVI SELECTION is DIGITAL.

By using the D-SUB to DVI-A cable, the DVI SELECTION is ANALOG.

DIGITAL: DVI digital input is available.

ANALOG: DVI analog input is available.

NOTE:

HDCP CONTENT (Digital Input Only)

Selects the type of input to be used with HDCP CONTENT.

OFF: When a PC or other computer equipment is connected, select ÒOFFÓ.

ON: When a DVD player or other type of high definition device is connected, select ÒONÓ.

NOTE: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any problems, please refer to the Troubleshooting section of this UserÕs Manual.

English-10

LCD2690WUXi, 2690 specifications

The NEC LCD2690WUXi is a professional-grade display that exemplifies innovation in visual technology, specifically tailored for users who demand high performance and exceptional image quality. With a large 26-inch screen size, this monitor offers a commanding presence on any desk, making it suitable for a variety of applications, from graphic design to video editing.

One of the standout features of the LCD2690WUXi is its impressive WUXGA resolution of 1920 x 1200 pixels. This resolution provides users with an expansive workspace, allowing for clearer images and sharper text. Coupled with a high contrast ratio, this monitor delivers deep blacks and vibrant colors, making it ideal for tasks where color accuracy and detail are paramount.

The LCD2690WUXi employs advanced IPS (In-Plane Switching) technology, which enhances color reproduction and provides wider viewing angles compared to traditional TN panels. This means that no matter where you sit in relation to the screen, you can expect consistent color fidelity and image clarity. The monitor is capable of displaying a color gamut that meets 100% of the sRGB color space, ensuring that graphic designers and photographers can trust the colors they see on the screen.

Ergonomics is another key aspect of the LCD2690WUXi. The display offers a range of adjustable settings, including height, tilt, pivot, and swivel. This flexibility allows users to customize their viewing experience for maximum comfort during prolonged periods of use, reducing the risk of neck and back strain.

Connectivity options on the NEC LCD2690WUXi are also noteworthy. It features multiple input ports, including DisplayPort, DVI-D, and VGA, making it versatile enough to connect with various devices. The inclusion of built-in USB hubs allows for easy access to peripherals.

Additionally, this monitor is designed with energy efficiency in mind, complying with various environmental standards. The integrated Eco Mode helps reduce power consumption without sacrificing performance, aligning with the growing demand for sustainable technology products.

In summary, the NEC LCD2690WUXi is a powerful and versatile monitor that combines high-resolution display, IPS technology, ergonomic design, and connectivity features to cater to the needs of professionals. Whether you are a creative professional or simply on the lookout for a reliable display, the LCD2690WUXi proves to be an excellent choice, delivering performance and quality in equal measure.