NEC LCD2690WUXi user manual Hdcp Content, English-21

Page 23

Tag6

Color Control

Colour Control Systems: Seven preset colour settings.

 

 

For preset settings 1, 2, 3 and 5, the following levels can be adjusted:

 

 

TEMPERATURE: Adjust the white temperature by increasing or decreasing this setting.

 

 

A lower colour temperature will make the screen reddish and a higher colour temperature

 

 

will make the screen bluish.

 

 

WHITE (White Balance): If TEMPERATURE needs further adjustment; the individual

 

 

R/ G/ B/ levels of the white point can be adjusted. To adjust the R/G/B levels, CUSTOM

 

 

must be showing as the TEMPERATURE selection.

 

 

HUE: Adjusts the hue of each colour*1. The change in colour will appear on screen and

 

 

the menu colour bars will show the amount of adjustment.

 

 

SATURATION: Adjusts the colour depth of each colour*1. Press the ÒRIGHTÓ button and

 

 

the colour vividness increases.

 

 

OFFSET: Adjusts the colour brightness of each colour*1. Press ÒRIGHTÓ button and the

 

 

colour Brightness increases.

 

 

*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.

 

 

NATIVE, sRGB: Original colour presented by the LCD panel that is unadjustable.

 

 

PROGRAMMABLE: The colour tone that was set up with the downloaded application

 

 

software is reflected.

 

 

 

Tag7

Sharpness

This is a digital capability for keeping a crisp image at all signal timings. It continuously

 

 

adjusts to maintain a distinct or soft image as you prefer, and is set independently

 

 

according to different timings. Press ÒLeftÓ or ÒRightÓ to adjust.

 

 

 

 

DVI Selection

This function selects the DVI input mode. When the DVI selection has been changed, you

 

 

must restart your computer. Press ÒLeftÓ or ÒRightÓ to select.

 

 

AUTO: By using the DVI-D to DVI-D cable, the DVI SECTION is DIGITAL.

 

 

By using the D-SUB to DVI-A cable, the DVI SECTION is ANALOG.

 

 

DIGITAL: DVI digital input is available.

 

 

ANALOG: DVI analog input is available.

 

 

 

 

HDCP CONTENT

Selects the type of input to be used with HDCP CONTENT.

 

(Digital Input Only)

OFF: When a PC or other computer equipment is connected, select ÒOFFÓ.

 

 

ON: When a DVD player or other type of high definition device is connected, select ÒONÓ.

 

 

Note: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any problems,

 

 

please refer to the Troubleshooting section of this UserÕs Manual.

 

 

 

 

Video Detect

Selects the method of video detection when more than one computer is connected.

 

 

Press ÒLeftÓ or ÒRightÓ to select.

 

 

FIRST: The video input has to be switched to ÒFIRSTÓ mode. When current video input

 

 

signal is not present, then the monitor searches for a video signal from the other video

 

 

input port. If the video signal is present in the other port, then the monitor switches the

 

 

video source input port to the new found video source automatically. The monitor will not

 

 

look for other video signals while the current video source is present.

 

 

LAST: The video input has to be switched to the ÒLASTÓ mode. When the monitor is

 

 

displaying a signal from the current source and a new secondary source is supplied to the

 

 

monitor, then the monitor will automatically switch to the new video source. When current

 

 

video input signal is not present, then the monitor searches for a video signal from the

 

 

other video input port. If the video signal is present in the other port, then the monitor

 

 

switches the video source input port to the new found video source automatically.

 

 

NONE: The Monitor will not search the other video input port unless the monitor is

 

 

turned on.

 

 

 

 

Off Timer

Monitor will automatically turn off after the preset time period from power on with the

 

 

ON/OFF function. When you select ÒONÓ, press ÒSELECTÓ and ÒLeftÓ or ÒRightÓ to adjust.

 

 

Before powering off, a message will appear on the screen asking the user if they want to

 

 

delay the turn off time by 60 minutes. Press any OSM button to delay the turn off time.

 

 

 

 

IPM (Intelligent Power

The Intelligent Power Manager allows the monitor to enter into a power saving mode after

 

Manager)

a period of inactivity. The IPM has three settings.

 

 

OFF: Monitor does not go into power save mode when the input signal is lost.

 

 

STANDARD: Monitor enters power save mode automatically when the input signal is lost.

 

 

OPTION: Monitor enters power save mode automatically when the amount of surrounding

 

 

light goes below the level that is determined by the user.

 

 

 

 

IPM Setting

Adjusts the ILLUMINANCE value for IPM.

 

 

 

English

English-21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents MultiSync LCD2690WUXi SpectraView TCOÕ03 IndexEnglish-1 DeclarationEnglish-2 Canadian Department of Communications Compliance StatementDeclaration of Conformity FCC InformationContents English-4 Quick StartEnglish-5 Figure C.3Swivel Raise and Lower Monitor ScreenScreen Rotation TiltEnglish-7 Flexible Arm InstallationRemove Monitor Stand for Mounting Contrast ControlsBrightness/Contrast Controls BrightnessImage Controls Auto Adjust Analog input onlySharpness Color Control SystemsTools ExpansionMenu Tools OSM Warning InformationEnglish-13 Safety Precautions and MaintenanceRecommended use English-14 Cleaning the LCD PanelCleaning the Cabinet ErgonomicsEnglish-15 SpecificationsEnglish-16 FeaturesTroubleshooting Auto Luminance How to use the advanced menuHow to exit the advanced menu AppendixEnglish-19 FineSharpness Ntaa SWEnglish-20 ZoomZoom POS English-21 Hdcp ContentEnglish-22 English-23 DDC/CIEnglish-24 Tile Comp OFF Tile Comp on TagB Date & TimeEnglish-25 Using the Auto Brightness functionEnglish-26 TCO’03 CongratulationsWeee Mark European Directive 2002/96/EC Manufacturer’s Recycling and Energy InformationDisposing of your old NEC product Energy Saving
Related manuals
Manual 4 pages 16.69 Kb Manual 29 pages 59.18 Kb

LCD2690WUXi, 2690 specifications

The NEC LCD2690WUXi is a professional-grade display that exemplifies innovation in visual technology, specifically tailored for users who demand high performance and exceptional image quality. With a large 26-inch screen size, this monitor offers a commanding presence on any desk, making it suitable for a variety of applications, from graphic design to video editing.

One of the standout features of the LCD2690WUXi is its impressive WUXGA resolution of 1920 x 1200 pixels. This resolution provides users with an expansive workspace, allowing for clearer images and sharper text. Coupled with a high contrast ratio, this monitor delivers deep blacks and vibrant colors, making it ideal for tasks where color accuracy and detail are paramount.

The LCD2690WUXi employs advanced IPS (In-Plane Switching) technology, which enhances color reproduction and provides wider viewing angles compared to traditional TN panels. This means that no matter where you sit in relation to the screen, you can expect consistent color fidelity and image clarity. The monitor is capable of displaying a color gamut that meets 100% of the sRGB color space, ensuring that graphic designers and photographers can trust the colors they see on the screen.

Ergonomics is another key aspect of the LCD2690WUXi. The display offers a range of adjustable settings, including height, tilt, pivot, and swivel. This flexibility allows users to customize their viewing experience for maximum comfort during prolonged periods of use, reducing the risk of neck and back strain.

Connectivity options on the NEC LCD2690WUXi are also noteworthy. It features multiple input ports, including DisplayPort, DVI-D, and VGA, making it versatile enough to connect with various devices. The inclusion of built-in USB hubs allows for easy access to peripherals.

Additionally, this monitor is designed with energy efficiency in mind, complying with various environmental standards. The integrated Eco Mode helps reduce power consumption without sacrificing performance, aligning with the growing demand for sustainable technology products.

In summary, the NEC LCD2690WUXi is a powerful and versatile monitor that combines high-resolution display, IPS technology, ergonomic design, and connectivity features to cater to the needs of professionals. Whether you are a creative professional or simply on the lookout for a reliable display, the LCD2690WUXi proves to be an excellent choice, delivering performance and quality in equal measure.
Top Page Image Contents