NEC PlasmaSync 3300 user manual Osmtm Controls, Volume Control, RGB Signal, Picture Adjustments

RGB Signal, Picture Adjustments

1.a)Adjust the contrast of RGB display. b)Adjust the brightness of RGB display.

2.Adjust the picture position.

See “Signal Identification Flowchart” on pages 43 and 44.

NOTE: To reset the stored adjustment data and recall the factory preset data, press the NORMAL key on the remote control unit.

NOTE: Over adjusting the POSITION Up/Down may cause a picture to dis- tort. If this happens, readjust the picture so that the distortion is not seen.

31

OSMTM Controls

NEC's new OSM, or On-Screen Manager, System offers the ultimate form of monitor controls. Keys on the remote control unit allow you to easily navigate through menus and adjust controls. As you chose controls, the moving icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls.

OSM controls include extended controls such as Position, White Balance and other OSM utilities. Adjustments are saved instantly. The currently addressed control can be reset to factory settings by pressing the NORMAL key.

Volume Control

1. Adjust the volume by pressing the VOLUME keys (˜/ ˜).

2.To cancel sound, press the MUTE key on the remote control unit; press again to restore sound.

OSM keys on the remote control unit function as follows:

PROCEED	: accesses the OSM controls.
	-in the main menu: proceeds to the selected
	menu choice.
	-in a submenu: proceeds to the control in that
	submenu.
EXIT	: in the main menu: exits the OSM controls.

-in a submenu: exits to the OSM main menu.

POSITION CONTROL up/down : moves the arrow up or down to select one of

	the controls.
POSITION CONTROL-/+	: in the main menu: has no function.

-in a submenu: moves the bar in the + or - direction to increase or decrease the adjustment.

NORMAL (RASTER/VISUAL) : resets the currently selected control to the factory setting.

Direct Control Screen

To switch to another control screen, press any one of the other keys. *To end the OSM display, press EXIT.

*If no key operation is made within three seconds, the OSM display will disap- pear.

-in the main menu: resets all the controls within the selected menu.

-in a submenu: resets the selected control.

Typical OSM windows have the following elements:

arrow	: indicates the selected menu or control.
moving icon	: provides a quick moving illustration of what the
	control will do (also indicates the direction of control
	when adjusting).
scroll bar	: indicates direction of adjustment.

H-WIDTH

S i z e C o n t r o l

W i d t h
￿	￿{
V-HEIGHT
S i z e C o n t r o l
H e i g h t
￿	￿{
H-POSITION
P o s i t i o n C o n t r o l
L e f t / R i g h t
	+
￿
	￿{

V-POSITION

P o s i t i o n C o n t r o l
D o w n / U p	￿{+
￿

Side Pin

S i d e P i n C o n t r o l

I n / O u t
￿	￿{

Scan Select

S c a n S e l e c t

O v e r S c a n

U n d e r S c a n

Brightness

V i s u a l C o n t r o l

B r i g h t n e s s

￿￿{+

Contrast

V i s u a l C o n t r o l

C o n t r a s t

￿￿{+

Color

V i s u a l C o n t r o l

		C o l o r
		￿				￿{+
Tint
	V i s u a l C o n t r o l
		T i n t
		￿			+
					￿{
Sharpness
	V i s u a l C o n t r o l
		S h a r p n e s s
		￿			￿{+
Volume
	V o l u m e C o n t r o l
	Audio Control
		M U T E : O n
			Volume/Mute: On
		￿			￿{
	-			+

32