NEC PlasmaSync 3300 user manual Remote Control Unit, Raster Control

Remote Control Unit

1	ON POWER OFF		DEGAUSS
	VIDEO1VIDEO2 RGB1		RGB2
2
ON	WIDTH
OFF	HEIGHT	POSITION/CONTROL
	SIDE PIN
	SCAN SELECT
	RASTER CONTROL		NORMAL
	RGB/VIDEO	VIDEO
	CONTRAST BRIGHT COLOR TINT		SHARPNESS
	VISUAL CONTROL		NORMAL
	VOLUME		MUTE
	ON SCREEN	EXIT PROCEED
	MULTIMEDIA MONITOR RD-336E

3

4

5

6

7

11

1 POWER ON/OFF	Press POWER ON to turn the monitor on
	when the STANDBY/POWER indicator is lit
	orange.
	Press POWER OFF to turn the monitor off
	and the monitor will go into the standby condi-
	tion.
2 VIDEO 1	Press to select reception of a conventional
	component or S-connector component con-
	nected to VIDEO 1 IN terminal.
3 VIDEO 2	Press to select reception of a conventional
	component or S-connector component con-
	nected to VIDEO 2 IN terminal.
4 RGB1	Press to select reception of a component
	connected to RGB 1 IN terminal.
5 RGB 2	Press to select reception of a component
	connected to RGB 2 IN terminal.

Raster Control

6 POSITION/CONTROL	Adjusts the vertical position of the image up
(˜/ ˜ / ◀ / ♣)	and down, and the horizontal position of the
	image from left to right.
CONTROL (. /,)	Moves the bar in the , or . direction to in-
	crease or decrease the adjustment in an
	OSM submenu.
CONTROL( ˜ / ˜)	Moves the arrow up or down to select one of
	the controls.
7 NORMAL	This key resets the raster adjustment set-
	tings of user changeable memory and recalls
	the factory preset data.

NOTE: This can be done to only the signal having the factory preset data.

12