NEC PX-50XM4G user manual When Picture Size is set to OFF, True, Full,  Supported resolution

Page 16

CONFIDENTIAL

Wide Screen Operation with FULL size screen

Computer Signals

Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

The image is expanded in the horizontal and vertical direction.

→NORMAL → FULL → ZOOM

When displaying enhanced split screen:

NORMAL ↔ FULL

NORMAL size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

FULL size screen

The image is expanded in the horizontal direction.

ZOOM size screen

ZOOM size screen

When wide signals are input.

TRUE

The image is true resolution.

FULL

When wide signals are input.

FULL size screen

When “PICTURE SIZE” is set to “OFF”

The screen size switches as follows:

→TRUE → FULL → ZOOM

TRUE size screen (VGA, SVGA 4:3)

The image is true resolution.

Information

Supported resolution

See page E-2 of Model Information for details on the display output of the various VESA signal standards supported by the monitor.

“PICTURE SIZE” setting

When the setting of “ PICTURE SIZE” is OFF, the size of RGB-input pictures will be TRUE in place of

NORMAL.

When 852 (848) dot  480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“ Table of Signals Supported” on page E-2 of Model Information.

*“ VGA” , “ SVGA” and “ SXGA” are registered trademarks of IBM, Inc. of the United States.

Note:

Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in.

Downloaded From TV-Manual.com Manuals

E-12

4-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PlasmaSync Plasma Monitor HD/DVD/DTV input signals supported on this system SignalsTable of Signals Supported Supported resolutionImportant Information English Deutsch Français Español Italiano Precautions Important InformationContents Installation Ventilation Requirements for enclosure mountingVideo signal RGB/DVD/HD signal Creating a video wallCable Management CablesHow to use the remote control Battery Installation and ReplacementUsing the wired remote control mode Handling the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide OperationsWhen Picture Size is set to OFF  Supported resolution Picture Size setting TrueSplit Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time Operations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the OSM controls Zooming up pictures Advanced menu mode Menu OperationsReset Menu Tree Restoring the factory default settings LanguagePicture Settings Menu Adjusting the pictureSetting the color temperature Reducing noise in the pictureAdjusting the color to the desired level Making the Low Tone adjustmentsAdjusting the colors Changing the Gamma CurveAudio Settings Menu Image Adjust Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjOption1 Settings Menu Setting the on-screen menuSetting the BNC connectors Setting the RGB1 connectorResetting to the default values Setting the Input SkipSetting high definition images to the suitable screen size Option2 Settings Menu Setting the power management for computer imagesSetting the picture to suit the movie POWER/STANDBY indicatorOrbiter settings Inverse SettingsOrbiter Function settings Setting the timeSetting the gray level for the sides of the screen Setting the screen size for S1/S2 video inputSoft Focus settings Gray Level settingsOption3 Settings Menu Setting the picture size for RGB input signalsSetting the signal and black level for DVI signal Using the timerProgram Timer settings To reset the programTo reset the data Special characters in the Program Timer screenSetting the power on mode Enabling/disabling remote control wireless transmissionLoop Out setting Enabling/disabling the front panel controlsID number setting Video Wall settingDISP. Mode settings Auto ID settingsImage Adjust settings On Delay settingsPLE Link settings Repeat Timer settingsRepeat Timer PLE LinkOption4 Settings Menu Erasing the sub screen image when there isNo input signal Displaying still images in the sub screenAdvanced OSM Settings Menu Language Settings MenuSwitching the input source quickly Setting the menu modeColor System Settings Menu Setting the video signal formatExample Setting the color system to 3.58 Ntsc Video signal formatsExternal Control Pin AssignmentsTroubleshooting Symptom Checks Remedy
Related manuals
Manual 40 pages 42.62 Kb

PlasmaSync 50XM4, PX-50XM4G specifications

The NEC PlasmaSync 50XM4 and PX-50XM4G series are notable displays in the realm of high-definition plasma technology. Renowned for their exceptional picture quality and versatile features, they have been designed to meet the needs of various professional environments, including corporate settings, educational institutions, and retail applications.

At the heart of both models is a stunning 50-inch diagonal screen, capable of delivering a resolution of 1366 x 768 pixels. This high resolution ensures that images are clear, vibrant, and rich in detail, making it an excellent choice for displaying high-quality graphics, video content, and data presentations. The displays boast a high contrast ratio, which enhances the depth and richness of blacks, while bright colors pop, resulting in an immersive viewing experience.

One of the standout features of the NEC PlasmaSync series is their advanced plasma technology, which provides extensive viewing angles of up to 160 degrees. This allows multiple viewers to enjoy consistent picture quality from various positions in a room, making the models suitable for large audiences. Additionally, these displays utilize a fast response time, minimizing motion blur during dynamic video playback, which is essential for action-packed content.

The NEC PlasmaSync 50XM4 and PX-50XM4G are equipped with an array of connectivity options, including multiple HDMI ports, VGA inputs, and composite video connectors. This flexibility allows users to easily connect various devices such as computers, Blu-ray players, and media players, making these displays adaptable to a wide range of uses.

Moreover, both models incorporate built-in speakers, delivering decent audio quality suitable for presentations and video playback without the need for external sound systems. This is particularly advantageous in situations where space is limited or a quick setup is required.

With their sleek and professional design, the NEC PlasmaSync series can seamlessly fit into any environment. The displays can be mounted on walls or used with stands, offering further versatility. They also feature a robust thermal management system that ensures optimal performance while preventing overheating, a crucial aspect for prolonged usage in demanding settings.

In conclusion, the NEC PlasmaSync 50XM4 and PX-50XM4G represent a compelling fusion of cutting-edge plasma technology, extensive connectivity, and user-friendly features. Whether for business or education, these displays are engineered to deliver stunning visuals and reliable performance, making them a valuable investment for any professional setting.
Top Page Image Contents