NEC PX-50XM4G, PlasmaSync 50XM4 user manual Setting the Input Skip, Resetting to the default values

Page 26

CONFIDENTIAL

Information

⬛RGB SELECT modes

One of these 7 modes must be selected in order to display the following signals correctly.

AUTO: Select the suitable mode for the specifications of input signals as listed in the table “ Computer input signals supported by this system” on page E-2 of Model Information.

STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)

WIDE1: When an 852 dot× 480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.

WIDE2: When an 848 dot× 480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.

WIDE3: When an 1920 dot× 1200 line signal with a horizontal frequency of 74.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE3.

DTV: Set this mode when watching digital broadcasting (480P).

See page E-2 of Model Information for the details of the above settings.

Setting the Input Skip

When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed.

This setting is valid only for the INPUT SELECT button on the unit.

Example: Set to “ON”

On “ INPUT SKIP” of “ OPTION1” menu, select “ ON” .

 

 

 

OPTION1

 

1 / 4

OSM

 

 

 

 

BNC INPUT

 

:

RGB

D-SUB INPUT

 

:

RGB

RGB SELECT

 

:

AUTO

HD SELECT

 

:

1080B

 

INPUT SKIP

 

 

:

ON

ALL RESET

 

:

OFF

 

NEXT PAGE

 

 

 

 

 

SEL.

ADJ.

 

EXIT

RETURN

Information

⬛INPUT SKIP settings

OFF: Regardless of the presence of the signal, scan and display all signals.

ON: If no input signal is present, skip that signal.

* “ SETTING NOW” will appear during the input search.

Resetting to the default values

Use these operations to restore all the settings (PICTURE, AUDIO, IMAGE ADJUST, OPTION1~4, etc) to the factory default values.

Refer to page E-16 for items to be reset.

On “ ALL RESET” of “ OPTION1” menu, select “ ON” , then press the MENU/ENTER button.

Setting high definition images to the suitable screen size

Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.

Example: Setting the “1080B” mode to “1035I”

On “ HD SELECT” of “ OPTION1” menu, select “ 1035I” .

 

 

 

 

OPTION1

 

1 / 4

OSM

 

 

 

 

BNC INPUT

 

:

RGB

D-SUB INPUT

 

:

RGB

RGB SELECT

 

:

AUTO

 

HD SELECT

 

 

:

1035 I

 

 

 

 

 

 

 

INPUT SKIP

 

:

OFF

ALL RESET

 

:

OFF

 

 

NEXT PAGE

 

 

 

 

 

 

SEL.

ADJ.

 

EXIT

RETURN

Information

⬛HD SELECT modes

These 3 modes are not displayed in correct image automatically.

1080B: Standard digital broadcasts

1035I: Japanese “ High Vision” signal format

1080A: Special Digital broadcasts (for example : DTC100)

 

 

OPTION1

 

1 / 4

 

ALL RESET

OSM

 

 

 

 

 

 

 

BNC INPUT

 

 

:

RGB

 

 

D-SUB INPUT

:

RGB

 

 

RGB SELECT

:

AUTO

 

SETTING NOW

HD SELECT

 

 

:

1080B

 

 

INPUT SKIP

 

 

:

OFF

 

 

ALL RESET

 

 

:

ON

 

 

 

 

 

 

 

 

 

 

 

 

NEXT PAGE

 

 

 

 

 

 

SEL.

MENU/ENTER

OK

 

EXIT

RETURN

 

 

 

 

 

 

 

 

 

 

 

When the “ SETTING NOW” screen disappears, then all the settings are restored to the default values.

Downloaded From TV-Manual.com Manuals

E-22

4-26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents PlasmaSync Plasma Monitor HD/DVD/DTV input signals supported on this system SignalsTable of Signals Supported Supported resolutionImportant Information English Deutsch Français Español Italiano Precautions Important InformationContents Installation Ventilation Requirements for enclosure mountingCable Management Video signal RGB/DVD/HD signalCreating a video wall CablesUsing the wired remote control mode How to use the remote controlBattery Installation and Replacement Handling the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide Operations Picture Size setting When Picture Size is set to OFF Supported resolution TrueShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modeSplit Screen Operations Adjusting the OSM controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed Zooming up pictures Advanced menu mode Menu OperationsReset Menu Tree Restoring the factory default settings LanguageSetting the color temperature Picture Settings MenuAdjusting the picture Reducing noise in the pictureAdjusting the colors Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveSetting the allocation of the audio connectors Audio Settings MenuImage Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture AdjSetting the BNC connectors Option1 Settings MenuSetting the on-screen menu Setting the RGB1 connectorSetting high definition images to the suitable screen size Setting the Input SkipResetting to the default values Setting the picture to suit the movie Option2 Settings MenuSetting the power management for computer images POWER/STANDBY indicatorOrbiter Function settings Orbiter settingsInverse Settings Setting the timeSoft Focus settings Setting the gray level for the sides of the screenSetting the screen size for S1/S2 video input Gray Level settingsSetting the signal and black level for DVI signal Option3 Settings MenuSetting the picture size for RGB input signals Using the timerTo reset the data Program Timer settingsTo reset the program Special characters in the Program Timer screenLoop Out setting Setting the power on modeEnabling/disabling remote control wireless transmission Enabling/disabling the front panel controlsID number setting Video Wall settingImage Adjust settings DISP. Mode settingsAuto ID settings On Delay settingsRepeat Timer PLE Link settingsRepeat Timer settings PLE LinkNo input signal Option4 Settings MenuErasing the sub screen image when there is Displaying still images in the sub screenSwitching the input source quickly Advanced OSM Settings MenuLanguage Settings Menu Setting the menu modeExample Setting the color system to 3.58 Ntsc Color System Settings MenuSetting the video signal format Video signal formatsExternal Control Pin AssignmentsTroubleshooting Symptom Checks Remedy
Related manuals
Manual 40 pages 42.62 Kb

PlasmaSync 50XM4, PX-50XM4G specifications

The NEC PlasmaSync 50XM4 and PX-50XM4G series are notable displays in the realm of high-definition plasma technology. Renowned for their exceptional picture quality and versatile features, they have been designed to meet the needs of various professional environments, including corporate settings, educational institutions, and retail applications.

At the heart of both models is a stunning 50-inch diagonal screen, capable of delivering a resolution of 1366 x 768 pixels. This high resolution ensures that images are clear, vibrant, and rich in detail, making it an excellent choice for displaying high-quality graphics, video content, and data presentations. The displays boast a high contrast ratio, which enhances the depth and richness of blacks, while bright colors pop, resulting in an immersive viewing experience.

One of the standout features of the NEC PlasmaSync series is their advanced plasma technology, which provides extensive viewing angles of up to 160 degrees. This allows multiple viewers to enjoy consistent picture quality from various positions in a room, making the models suitable for large audiences. Additionally, these displays utilize a fast response time, minimizing motion blur during dynamic video playback, which is essential for action-packed content.

The NEC PlasmaSync 50XM4 and PX-50XM4G are equipped with an array of connectivity options, including multiple HDMI ports, VGA inputs, and composite video connectors. This flexibility allows users to easily connect various devices such as computers, Blu-ray players, and media players, making these displays adaptable to a wide range of uses.

Moreover, both models incorporate built-in speakers, delivering decent audio quality suitable for presentations and video playback without the need for external sound systems. This is particularly advantageous in situations where space is limited or a quick setup is required.

With their sleek and professional design, the NEC PlasmaSync series can seamlessly fit into any environment. The displays can be mounted on walls or used with stands, offering further versatility. They also feature a robust thermal management system that ensures optimal performance while preventing overheating, a crucial aspect for prolonged usage in demanding settings.

In conclusion, the NEC PlasmaSync 50XM4 and PX-50XM4G represent a compelling fusion of cutting-edge plasma technology, extensive connectivity, and user-friendly features. Whether for business or education, these displays are engineered to deliver stunning visuals and reliable performance, making them a valuable investment for any professional setting.
Top Page Image Contents