English-17

GAMMA	Allows you to manually select the brightness level of grayscale. There are ﬁ ve selections:
	sRGB, L Star, DICOM, PROGRAMMABLE and CUSTOM. We recommend to show
	grayscale image data on screen.
	sRGB: GAMMA setting for sRGB.
	L Star: GAMMA for Lab color space.
	DICOM: DICOM GSDF (Grayscale Standard Display Function) is possible for medical
	imaging.
	PROGRAMMABLE: The brightness of grayscale can be changed to your preference by
	downloading the application software.
	CUSTOM: Below items can be adjusted when CUSTOM is selected as the GAMMA
	SELECTION setting.
	Custom Value: The gamma value is selected from the rate of 0.5 to 4.0 by 0.1 steps.

Adjusts the black luminance. When low settings are selected that cannot be displayed,

the indicator on the OSD will turn magenta.

RED

Adjusts color gamut. Magenta warns color saturation due to outside of LCD gamut.

COLOR VISION EMU	Emulates color visions for difference color sense. P, D, T is for dicromats and Grayscale
	is for contrast regibility checking.

UNIFORMITY	This function electronically compensates for the slight variations in the white uniformity
	level as well as for deviations in color that may occur throughout the display area of
	the screen. These variations are characteristic of LCD panel technology. This function
	improves the color and evens out the luminance uniformity of the display.
	NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
	display. If greater luminance is desired over the uniform performance of the display,
	then UNIFORMITY should be turned off. A higher number produces a better effect, but
	may also reduce CONTRAST RATIO. When BRIGHTNESS is shown in magenta, the
	UNIFORMITY setting is automatically changed.