NEC PA241W user manual English-5, USB downstream Highest Stand Position

4.Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor.

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module’s life.

English

30° Tilt

USB downstream

Highest

Stand

Position

USB downstream

USB upstream1

USB upstream2

DVI-1 D-SUB

DisplayPort DVI-2

A Type

A Type

B Type

B Type

Figure C.1a

DC-OUT*

Power cord

*NEC optional product attachment.

Do not use this connector unless specifi ed.

Figure C.1

5.To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly (Figure C.2 and Figure C.3).

6.Please check that you can still rotate, raise and lower the monitor screen when you have installed the cables.

D-SUB Cable

DVI-1 Cable

Power Cord

USB Cable

DisplayPort

Cable

Power Cord

D-SUB Cable

DVI-1/DVI-2

Cables

USB Cable

Figure C.2 Figure C.3

English-5