External Equipment Connection, Video Input

External Equipment Connection

When connecting to external equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment.

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

S-VIDEO INPUT

If using an S-VIDEOsource, the picture quality will be improved over a video source.

1. Connect the S-VIDEO output of a VCR to the

S-VIDEOinput on the TV.

S-VIDEO	A/V-IN
	L(MONO) R

Antenna connection

1.Connect RF out on the VCR to the Antenna input on the rear of the TV.

2.Connect the antenna cable to the antenna in jack on the VCR.

3.Press the TV/AV button to select Antenna input source.

4.Press the PLAY button on the VCR.

ANT. POWER

VCR

2.	Connect the audio cables from the S-VIDEO
	VCR to the L (MONO) R inputs on the TV.
3.	Select S-VIDEOmode by pressing the TV/AV
	button repeatedly.
4.	Press the PLAY button on the VCR.

The VCR playback picture appears on the screen.

VCR

COMPONENT INPUT

1.Connect the Video outputs (Y Cb Cr) on a DVD to the COMPONENT on the TV.

2.Press the TV/AV button to select COMPONENT mode.

3.Press the PLAY button on the DVD.

POWER

L R

COMPONENT

(DVD)

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound form the speaker on the TV. To adjust the headphone volume, press the VOLÏq button. If you press the MUTE button, the sound from the headphone is turned off.

Headphone

A/V INPUT

1.Connect the A/V out jacks on a VCR to A/V-IN jacks on the TV.

2.Press the TV/AV button to select VIDEO mode.

3.Press the PLAY button on the VCR.

The VCR playback picture appears on the TV screen.

Note : If you have a mono VCR, connect the audio cable from the VCR to the L(MONO) socket of the set.

A/V-IN

L(MONO) R

VCR