NEC NLT-15 owner manual Installation Basic Operation

Installation

Basic Operation

Installation Options

*You can install the TV on a wall or place it on a table-like surface.

*To eliminate any risk of injury from the TV falling, it should be mounted securely.

1. Wall Installation

Caution: Do not install the TV on a weak wall surface, like plaster etc. It is not needed any bracket or installation accessory with the exception of 2 nails or screws. Distance of holes of back panel is 305mm,

a. Drive 2 nails or screws on the wall, in the location you want to install the TV. b. Hang the TV on the nails or screws.

305mm

2. Desktop Installation

Turning the TV On and Off

Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on.

Press the power button on the front panel of the TV to go into standby mode.

1.If the TV is in standby mode, press the Power button on the remote controller or the TV itself to turn the TV on.

2.Press the Power button again on the remote controller or the TV itself to turn the TV off.

Note : If the TV is on and the power button is pressed to turn the TV off, the TV goes into standby mode.

Programme selection

You can select a Programme number with the PRxy button or NUMBER buttons.

Volume adjustment

Press the VOLÏq button to adjust the sound level.

Quick view

Press the Q.VIEW button to view the last channel you were watching.

Sound mute function

Press the MUTE button. The sound is switched off and the

mute display appears.

To cancel mute mode, press the MUTE button again, VOLÏq or SSM button.

POWER

SSM			PSM
MENU	I/II	Q.VIEW	TV/A V
		PRV
CVOL		OK	VOLB
		PRW
TEXT/MIX	SIZE	SLEEP	INDEX
UPDA TE	TIME	REVEAL

8

On screen menu language selection		Language
The menu can be displayed on the screen in desired		English
language.		Deutsch
First select your language.		Français
1.	Press the MENU button.	Italiano
		Español
2.	Select the Setup menu.
	Then press the VOLÏq button.
3.	Select the Language menu.	5-6=<>)>
4.	Press the PRxy button to select your desired
	language.
5.	Press the TV/AV button.
	All the on screen displays will appear in the selected
	language.
		9