NEC RDF225WG user manual Brightness/Contrast Controls, Size and Position Controls

Controls

OSD (On-Screen Display) control buttons on the front of the monitor function as follows:

	Main Menu	Sub-Menu
EXIT	Exits the OSD menu.	Exits to the OSD controls
		main menu.

Note : Deactivates the OSD menu and activates the OSD menu when the OSD is turned off.

CONTROL Moves the highlighted / area left/right to select one of the sub-menus.

Moves the highlighted area left/right to select one of the controls.

	Note : When the OSD menu is off, it acts as a Hot key for Brightness.
CONTROL	Has no function.	Moves the bar in the Ð or +
–/+		direction to decrease or
		increase the adjustment.
	Note : Deactivates the OSD menu and to adjust Contrast with Hot key set ÒONÓ.
SELECT	Enters sub-menu.	Has no function.
RESET	Resets all the controls within	Resets the highlighted control
	the highlighted menu	to the factory setting.

to the factory setting.

Note: Deactivates the OSD menu and Hot Key for input connector (INPUT 12).

Note: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to select the reset function.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen brightness.

Contrast: Adjusts the image brightness in relation to the background.

Degauss: Eliminates the buildup of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized. Caution: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.

Constant Brightness: Sustains the brightness and screen color levels consistently over the normal life of the monitor. The Constant Brightness function requires a 30 minute warm- up of the monitor before the feature is fully functional.

Size and Position Controls

Auto Adjust: Automatically adjust the horizontal and vertical size and position settings for the applicable timing signal.

NOTE: Auto Adjust is unavailable with no image signal or narrow size of image signal input.

Left/Right: Moves the image horizontally (left or right).

Down/Up: Moves the image vertically (up or down).

Narrow/Wide: Decreases or increases the horizontal size of the image.

Short/Tall: Decreases or increases the vertical size of the image.

5

RDF225WGmanual051804.p65 5 5/18/04, 10:03 AM