Monitor Specifications | MultiSync 95F | Notes |
Picture Tube | Diagonal: | 48.3 cm (19 inch) |
| Viewable Image Size: | 45.8 cm (18 inch) |
90° deflection, 0.25 mm trio dot pitch, medium short persistence phosphor,
Input Signal | Video: | ANALOG 0.7 |
|
| Sync: | Separate sync. TTL Level |
|
|
| Horizontal sync. Positive/Negative | |
|
| Vertical sync. Positive/Negative | |
|
| Composite sync. (Positive/Negative) (TTL Level) | |
|
|
|
|
Display Colours | Analog input: | Unlimited number of Colours | Depends on display card |
|
|
| used. |
|
|
|
|
Synchronization Range | Horizontal: | 31 kHz to 96 kHz | Automatically |
| Vertical: | 55 Hz to 160 Hz | Automatically |
|
|
|
|
Resolutions Supported |
| 640 x 480 @ 60 to 160 Hz | Some systems may not |
Resolution based on horizontal and | 800 x 600 @ 55 to 153 Hz | support all modes listed. | |
vertical frequencies only |
| 832 x 624 @ 55 to 144 Hz |
|
|
| 1024 x768 @ 55 to 120 Hz |
|
|
| 1152 x 875 @ 55 to 105 Hz |
|
|
| 1280 x 1024 @ 55 to 89 Hz | |
|
| 1600 x 1200 @ 55 to 76 Hz | Display cites recommended |
|
|
| resolution at 85 Hz for |
|
|
| optimal display performance. |
|
|
|
|
Active Display Area | Horizontal: | 356 mm | Dependent upon signal |
(Factory setting) | Vertical: | 267 mm | timing used, and does not |
|
|
| include border area. |
|
|
|
|
Active Display Area |
| 366 mm | Dependent upon signal |
(Full scan) |
| 274 mm | timing used, and does not |
|
|
| include border area. |
|
|
|
|
Power Supply |
| AC 100 - 240V, 50 – 60 Hz |
|
|
|
|
|
Current Rating |
| 2.2 A @ 100 - 240V |
|
|
|
| |
Dimensions |
| 444 (W) x453 (H) x455 (D) mm | |
|
|
|
|
Weight |
| 22.0 kg |
|
|
|
| |
Environmental Considerations | 0 °C to +35 °C |
| |
Operating Temperature: |
| ||
| Humidity: | 30% to 80% |
|
| Altitude: | 0 to 3000 m |
|
Storage Temperature: |
| ||
| Humidity: | 10% to 90% |
|
| Altitude: | 0 to 13700 m |
|
NOTE: Technical specifications are subject to change without notice.