NEC 61XM3 user manual Setting the gray level for the sides of the screen, Soft Focus settings

Page 29

CONFIDENTIAL

SCREEN WIPER

When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.

Example: Setting “SCREEN WIPER” to “ON”

On “ SCREEN WIPER” of “ LONG LIFE” menu, select “ ON” .

 

 

 

LONG LIFE

 

 

PLE

:

AUTO

ORBITER

:

OFF

INVERSE

:

OFF

 

SCREEN WIPER

:

ON

 

 

 

 

 

SOFT FOCUS

:

OFF

 

 

SEL.

ADJ.

 

RETURN

 

 

EXIT

Information

⬛SCREEN WIPER

ON: The white vertical bar appears.

You can set the time by pressing the MENU/ENTER button while “ ON” is set.

OFF: Screen wiper mode does not function.

Setting the time for SCREEN WIPER

Set a time duration and the speed.

Example: Setting so that the SCREEN WIPER mode starts in 30 minutes and proceeds for one and a half hours.

On “ SCREEN WIPER” of “ LONG LIFE” menu, select

“ON” , then press the MENU/ENTER button. THE “ SCREEN WIPER” screen appears. Adjust the times and speed.

SCREEN WIPER

 

WORKING TIME

:

01H30M

WAITING TIME

:

00H30M

SPEED

:

3

SEL.

ADJ.

EXIT

RETURN

Information

⬛Setting the time

WORKING TIME: Set the time duration for “ SCREEN WIPER” .

When the WORKING TIME is set to “ ON” the mode will stay on.

WAITING TIME: Set the standby time until the “ SCREEN WIPER” mode starts.

SPEED: Set the moving speed for the “ SCREEN WIPER” . The speed decreases as the number increases.

* The “ WAITING TIME” can not be set when the

“ WORKING TIME” is ON.

*THE “ WORKING TIME” and “ WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

⬛To select “ON” for the “WORKING TIME”...

Set the hours of the working time to 0H and the minutes to 0M. “ ON” will be displayed.

SOFT FOCUS

Reduces edges and softens the image.

Example: Setting “SOFT FOCUS” to “2”

On “ SOFT FOCUS” of “ LONG LIFE” menu, select “ 2” .

 

 

 

LONG LIFE

 

 

PLE

:

AUTO

ORBITER

:

OFF

INVERSE

:

OFF

SCREEN WIPER

:

OFF

 

SOFT FOCUS

 

:

2

 

 

SEL.

ADJ.

 

RETURN

 

EXIT

Information

⬛SOFT FOCUS settings

OFF: Turns the SOFT FOCUS function off.

1, 2, 3, 4: Activates the SOFT FOCUS setting. The higher numbers create a softer image.

“SHARPNESS” can not be adjusted in the “ PICTURE” menu.

Setting the gray level for the sides of the screen

Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.

Example: Setting “GRAY LEVEL” to “5”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ GRAY LEVEL” of “ OPTION2” menu, select “ 5” .

 

 

OPTION2

 

2 / 4

 

PREVIOUS PAGE

 

 

PWR. MGT.

:

OFF

CINEMA MODE

:

ON

LONG LIFE

 

 

 

 

 

:

5

 

GRAY LEVEL

 

S1/S2

:

OFF

PICTURE SIZE

:

ON

DVI SET UP

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Information

⬛GRAY LEVEL settings

This adjusts the brightness of the black (the gray level) for the sides of the screen.

The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO.

This feature is available only when an S-video signal is input via the VIDEO3 terminal.

Example: Setting the “S1/S2” to “AUTO”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ S1/S2” of “ OPTION2” menu, select “ AUTO” .

 

OPTION2

 

2 / 4

PREVIOUS PAGE

 

 

PWR. MGT.

:

OFF

CINEMA MODE

:

ON

LONG LIFE

 

 

GRAY LEVEL

:

3

S1/S2

 

:

AUTO

PICTURE SIZE

:

ON

DVI SET UP

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Downloaded From TV-Manual.com Manuals

E-25

4-29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents PlasmaSync Plasma Monitor Signals HD/DVD/DTV input signals supported on this systemSupported resolution Table of Signals SupportedImportant Information English Deutsch Français Español Italiano Important Information PrecautionsContents Ventilation Requirements for enclosure mounting InstallationCreating a video wall Video signal RGB/DVD/HD signalCable Management CablesBattery Installation and Replacement How to use the remote controlUsing the wired remote control mode Handling the remote controlFront View Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discs Supported resolution When Picture Size is set to OFF Picture Size setting TrueShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modeSplit Screen Operations Selecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the OSM controls Zooming up picturesMenu Operations  Advanced menu modeMenu Tree ResetLanguage  Restoring the factory default settingsAdjusting the picture Picture Settings MenuSetting the color temperature Reducing noise in the pictureMaking the Low Tone adjustments Adjusting the color to the desired levelAdjusting the colors Changing the Gamma CurveImage Adjust Settings Menu Audio Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the on-screen menu Option1 Settings MenuSetting the BNC connectors Setting the RGB1 connectorSetting high definition images to the suitable screen size Setting the Input SkipResetting to the default values Setting the power management for computer images Option2 Settings MenuSetting the picture to suit the movie POWER/STANDBY indicatorInverse Settings Orbiter settingsOrbiter Function settings Setting the timeSetting the screen size for S1/S2 video input Setting the gray level for the sides of the screenSoft Focus settings Gray Level settingsSetting the picture size for RGB input signals Option3 Settings MenuSetting the signal and black level for DVI signal Using the timerTo reset the program Program Timer settingsTo reset the data Special characters in the Program Timer screenEnabling/disabling remote control wireless transmission Setting the power on modeLoop Out setting Enabling/disabling the front panel controlsVideo Wall setting ID number settingAuto ID settings DISP. Mode settingsImage Adjust settings On Delay settingsRepeat Timer settings PLE Link settingsRepeat Timer PLE LinkErasing the sub screen image when there is Option4 Settings MenuNo input signal Displaying still images in the sub screenLanguage Settings Menu Advanced OSM Settings MenuSwitching the input source quickly Setting the menu modeSetting the video signal format Color System Settings MenuExample Setting the color system to 3.58 Ntsc Video signal formatsPin Assignments External ControlSymptom Checks Remedy Troubleshooting

61XM3 specifications

The NEC 61XM3 is a state-of-the-art multimedia projector designed for professional and corporate environments, offering a blend of advanced features and cutting-edge technology. This projector is particularly known for its excellent image quality, robust performance, and user-friendly interface, making it a preferred choice for presentations in various settings, from classrooms to large conference halls.

One of the standout features of the NEC 61XM3 is its impressive brightness. With a high lumen output, it ensures that images remain sharp and clear even in brightly-lit rooms. This capability is critical for engagement during presentations, as it allows the audience to view content without straining their eyes. Coupled with its high contrast ratio, the NEC 61XM3 delivers vivid colors and deep blacks, enhancing the overall viewing experience.

The projector is equipped with advanced DLP (Digital Light Processing) technology, which is known for its reliability and superior image quality. This technology minimizes color distortion, enabling the NEC 61XM3 to produce more accurate and lifelike images, essential for sharp graphics and detailed presentations. The projector can handle a variety of media formats, making it versatile for different presentations or multimedia content.

Another key characteristic of the NEC 61XM3 is its connectivity options. It comes with multiple input ports, including HDMI, VGA, and USB, allowing easy connection to a variety of devices such as laptops, tablets, and media players. Additionally, the projector supports wireless connectivity, making it convenient for users who prefer to project content without the hassle of cables. This feature is particularly beneficial for collaborative environments where multiple users may want to share their screens.

For ease of use and adaptability, the NEC 61XM3 includes various installation features that simplify setup. The lens shift and zoom capabilities allow flexibility in projector placement, enabling users to position the unit according to the specific needs of the room. This flexibility is crucial in professional settings where space may be limited.

Furthermore, the NEC 61XM3 is designed with longevity in mind. It incorporates an eco-friendly lamp that not only prolongs the life of the projector but also reduces energy consumption. This commitment to sustainability makes the projector a smart choice for organizations looking to minimize their environmental impact.

In summary, the NEC 61XM3 stands out as a high-performance multimedia projector that combines advanced imaging technologies with ease of use and adaptability. Its impressive brightness, robust connectivity options, and focus on user experience make it an excellent choice for a variety of professional applications. Whether for corporate meetings, educational purposes, or public presentations, the NEC 61XM3 is equipped to deliver exceptional performance and reliability.
Top Page Image Contents