NEC 61XM3 user manual PLE Link settings, Repeat Timer settings

Page 35

CONFIDENTIAL

PLE LINK

Use this function to set a uniform brightness for each display.

Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.

Example: Setting “ON”

On “ PLE LINK” of “ VIDEO WALL” menu, select “ ON” , then press the MENU/ENTER button.

 

 

 

 

VIDEO WALL

 

 

DIVIDER

:

1

 

POSITION

 

 

 

DISP. MODE

:

SPLIT

AUTO ID

:

OFF

IMAGE ADJUST

 

 

 

P. ON DELAY

:

OFF

 

PLE LINK

 

:

ON

 

 

 

 

 

 

REPEAT TIMER

:

OFF

 

 

SEL.

ADJ.

EXIT

RETURN

Information

⬛PLE LINK settings

ON: Sets a uniform brightness for each screen in a video wall. This can be set only when a 2⋅ 2 or 3⋅ 3 video wall is selected.

OFF: Sets the individual screen brightness for each screen in a video wall.

*When this function is set “ ON” , connect your plasma

displays with the remote cable (optional) in the order of the position numbers for the 2⋅ 2 video wall. See the

drawing below.

*If there are changes in the DIVIDER or POSITION, the PLE LINK will automatically turn OFF.

 

 

REPEAT TIMER

1

DIVIDER

:

1

 

 

SOURCE

:

VIDEO1

 

WORK TIME

:

00H03M

2

DIVIDER

:

4

 

 

SOURCE

:

RGB1

 

WORK TIME

:

00H06M

 

SEL.

ADJ.

 

RETURN

 

EXIT

Information

⬛REPEAT TIMER settings

DIVIDER: Divide the screen into 1, 4 or 9 sections.

SOURCE: Set the input mode to be displayed.

WORK TIME: Can be set to up to 4 hours 15 minutes in units of 1 minute.

If you set both timers, Timer 1 and Timer 2 run consecutively.

In the case of the Video wall, timer No.1 can be used to control all the displays simultaneously.

*This becomes effective when the on-screen menu goes out.

REMOTE IN

REMOTE OUT

No.1 No.2

No.4 No.3

Display 1

No.1 No.2

No.4 No.3

Display 4

REMOTE

OUT

REMOTE IN

REMOTE

OUT

REMOTE IN

No.1 No.2

No.4 No.3

Display 2

No.1 No.2

No.4 No.3

Display 3

REMOTE OUT

REMOTE IN

*With the 3⋅ 3 video wall, connect the final display to the first display the same way as with 2⋅ 2 video wall.

Note: The remote control can be operated unless the

IR REMOTE is set to “OFF”.

REPEAT TIMER

Use this to set two timers. Each timer can use the DIVIDER, SOURCE and WORK TIME.

Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.

Example:

TIMER1...VIDEO1 will be displayed for 3 minutes. TIMER2...RGB1 will be displayed for 6 minutes in a

2⋅ 2 video wall.

On “ REPEAT TIMER” of “ VIDEO WALL” menu, select

“ON” , then press the MENU/ENTER button. The “ REPEAT TIMER” screen appears. Adjust the items.

Downloaded From TV-Manual.com Manuals

E-31

4-35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents PlasmaSync Plasma Monitor Signals HD/DVD/DTV input signals supported on this systemSupported resolution Table of Signals SupportedImportant Information English Deutsch Français Español Italiano Important Information PrecautionsContents Ventilation Requirements for enclosure mounting InstallationCables Video signal RGB/DVD/HD signalCreating a video wall Cable ManagementHandling the remote control How to use the remote controlBattery Installation and Replacement Using the wired remote control modeFront View Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsTrue When Picture Size is set to OFF Supported resolution  Picture Size settingShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modeSplit Screen Operations Zooming up pictures Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSM controlsMenu Operations  Advanced menu modeMenu Tree ResetLanguage  Restoring the factory default settingsReducing noise in the picture Picture Settings MenuAdjusting the picture Setting the color temperatureChanging the Gamma Curve Adjusting the color to the desired levelMaking the Low Tone adjustments Adjusting the colorsAdjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Setting the allocation of the audio connectorsSetting the RGB1 connector Option1 Settings MenuSetting the on-screen menu Setting the BNC connectorsSetting high definition images to the suitable screen size Setting the Input SkipResetting to the default values POWER/STANDBY indicator Option2 Settings MenuSetting the power management for computer images Setting the picture to suit the movieSetting the time Orbiter settingsInverse Settings Orbiter Function settingsGray Level settings Setting the gray level for the sides of the screenSetting the screen size for S1/S2 video input Soft Focus settingsUsing the timer Option3 Settings MenuSetting the picture size for RGB input signals Setting the signal and black level for DVI signalSpecial characters in the Program Timer screen Program Timer settingsTo reset the program To reset the dataEnabling/disabling the front panel controls Setting the power on modeEnabling/disabling remote control wireless transmission Loop Out settingVideo Wall setting ID number settingOn Delay settings DISP. Mode settingsAuto ID settings Image Adjust settingsPLE Link PLE Link settingsRepeat Timer settings Repeat TimerDisplaying still images in the sub screen Option4 Settings MenuErasing the sub screen image when there is No input signalSetting the menu mode Advanced OSM Settings MenuLanguage Settings Menu Switching the input source quicklyVideo signal formats Color System Settings MenuSetting the video signal format Example Setting the color system to 3.58 NtscPin Assignments External ControlSymptom Checks Remedy Troubleshooting

61XM3 specifications

The NEC 61XM3 is a state-of-the-art multimedia projector designed for professional and corporate environments, offering a blend of advanced features and cutting-edge technology. This projector is particularly known for its excellent image quality, robust performance, and user-friendly interface, making it a preferred choice for presentations in various settings, from classrooms to large conference halls.

One of the standout features of the NEC 61XM3 is its impressive brightness. With a high lumen output, it ensures that images remain sharp and clear even in brightly-lit rooms. This capability is critical for engagement during presentations, as it allows the audience to view content without straining their eyes. Coupled with its high contrast ratio, the NEC 61XM3 delivers vivid colors and deep blacks, enhancing the overall viewing experience.

The projector is equipped with advanced DLP (Digital Light Processing) technology, which is known for its reliability and superior image quality. This technology minimizes color distortion, enabling the NEC 61XM3 to produce more accurate and lifelike images, essential for sharp graphics and detailed presentations. The projector can handle a variety of media formats, making it versatile for different presentations or multimedia content.

Another key characteristic of the NEC 61XM3 is its connectivity options. It comes with multiple input ports, including HDMI, VGA, and USB, allowing easy connection to a variety of devices such as laptops, tablets, and media players. Additionally, the projector supports wireless connectivity, making it convenient for users who prefer to project content without the hassle of cables. This feature is particularly beneficial for collaborative environments where multiple users may want to share their screens.

For ease of use and adaptability, the NEC 61XM3 includes various installation features that simplify setup. The lens shift and zoom capabilities allow flexibility in projector placement, enabling users to position the unit according to the specific needs of the room. This flexibility is crucial in professional settings where space may be limited.

Furthermore, the NEC 61XM3 is designed with longevity in mind. It incorporates an eco-friendly lamp that not only prolongs the life of the projector but also reduces energy consumption. This commitment to sustainability makes the projector a smart choice for organizations looking to minimize their environmental impact.

In summary, the NEC 61XM3 stands out as a high-performance multimedia projector that combines advanced imaging technologies with ease of use and adaptability. Its impressive brightness, robust connectivity options, and focus on user experience make it an excellent choice for a variety of professional applications. Whether for corporate meetings, educational purposes, or public presentations, the NEC 61XM3 is equipped to deliver exceptional performance and reliability.
Top Page Image Contents