Quick Start
Attach Tilt/Swivel Base
To attach the AccuSync monitor to your system, follow these instructions:
1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside fown on a firm table (Figure TS.1).
2.Position the six hooks of the tilt/swivel base into the six holes on the bottom of the monitor (Figure TS.2).
3.Slide the tilt/swivel base forward until the latch of the tilt/swivel base is secure (Figure TS.3).
4.Having successfully installed your tilt/swivel base, carefully turn the monitor right side up (Figure TS.4).
NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor.
NOTE: To avoid self injury or damage to the monitor, attach and remove tilt/ swivel base with care.
Bottom of monitor
| Top of monitor |
| |
Firm Table | CAUTION: Make certain that the tilt/ |
| |
Figure TS.1 | swivel base is locked firmly into place | Figure TS.2 | |
before turning the monitor upright. | |||
|
|
Figure TS.3 | 3 | Figure TS.4 |
|
|
AS507090.wpc | 5 | 5/14/01, 11:22 AM |