NEC AS171, AS191 user manual Recommended use, Safety Precautions and Maintenance, English-3

Page 5

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE ACCUSYNC LCD COLOR MONITOR:

DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

When operating the LCD monitor with its AC 125-240V power supply, use a power supply aord that matches the power supply voltage of the AC power outlet being used. The power supply cord you use must have been approved by and comply with the safety standards of your country. (Type H05VV-F should be used in Europe).

In U.K, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.

Do not place any objects onto the monitor and do not use the monitor outdoors.

The lamps in this product contain mercury. Please dispose according to state, local or federal law.

Do not bend power cord.

Do not use monitor in high temperature, humid, dusty, or oily areas.

Do not cover vent on monitor.

• Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can cause serious damage.

To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the monitor in a stable location and take measures to prevent falling.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet damaged.

If the monitor does not operate normally by following operating instructions.

If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

If you notice any structural damage such as cracks or unnatural wobbling.

 

Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block

 

 

ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on

 

 

top of monitor.

CAUTION

The power cable connector is the primary means of detaching the system from the power supply. The

 

 

monitor should be installed close to a power outlet, which is easily accessible.

Handle with care when transporting. Save packaging for transporting.

Image Persistence: Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

English

English-3

Image 5
Contents AccuSync AS171 AccuSync AS191 English-16 IndexDeclaration Registration InformationDeclaration of the Manufacturer English-1FCC Information Canadian Department of Communications Compliance StatementDeclaration of Conformity English-2English-3 Safety Precautions and MaintenanceRecommended use Cleaning the Cabinet Cleaning the LCD PanelErgonomics English-4Quick Start ContentsEnglish-6 TiltRemove Monitor Stand for Mounting Specifications Connecting a Flexible ArmRemoving the Base English-7Basic function at pressing each key Button ControlsOSD structure English-8English-9 BrightnessEnglish-10 OSD WarningEnglish-11 SpecificationsMonitor Specifications AccuSync AS171 Monitor English-12 Monitor Specifications AccuSync AS191 MonitorEnglish-13 FeaturesTroubleshooting English-15 TCO DisplaysThis display is designed for both you and the planet Disposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2002/96/EC