NEC EA241WM user manual Recommended use, Safety Precautions and Maintenance, English-3

Page 5

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC LCD COLOUR MONITOR:

DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

The power supply cord you use must have been approved by and comply with the safety standards of your country. (Type H05VV-F 3G 0.75mm2 should be used in Europe).

In U.K, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.

Do not place any objects onto the monitor and do not use the monitor outdoors.

The lamps in this product contain mercury. Please dispose according to state, local or federal law.

Do not bend, crimp or otherwise damage the power cord.

Do not use monitor in high temperatured, humid, dusty, or oily areas.

Do not cover vent on monitor.

Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can cause serious damage.

To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the monitor in a stable location and take measures to prevent falling.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet damaged.

If the monitor does not operate normally by following operating instructions.

If glass is broken, handle with care.

If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

CAUTION

• The power cable connector is the primary means of detaching the system from the

 

 

power supply. The monitor should be installed close to a power outlet which is easily

 

accessible.

 

• Handle with care when transporting. Save packaging for transporting.

 

• Carry the monitor holding the built-in handle and bottom frames of the monitor.

Do not carry holding only the stand.

Image Persistence: Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

English

English-3

Image 5
Contents MultiSync EA241WM English-18 IndexEnglish-1 Registration InformationDeclaration FCC Information Canadian Department of Communications Compliance StatementDeclaration of Conformity English-2English-3 Safety Precautions and MaintenanceRecommended use Cleaning the Cabinet Cleaning the LCD PanelErgonomics English-4Contents English-6 Quick StartEnglish-7 Figure C.2English-8 Raise and Lower Monitor ScreenTilt and Swivel English-9 Screen RotationRemove Monitor Stand for Mounting English-10 Flexible Arm InstallationControls Auto Adjust Analog input onlyBrightness/Contrast Controls English-11Colour Control System Image Controls Analog input onlyTools Menu ToolsEnglish-13 InformationOSD Warning English-14 SpecificationsMonitor Specifications MultiSync EA241WM English-15 FeaturesAppendix TroubleshootingEnglish-17 TCO’03 CongratulationsDisposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2002/96/EC
Related manuals
Manual 2 pages 4.7 Kb

EA241WM specifications

The NEC EA241WM is an advanced 24-inch monitor designed primarily for professional use, catering to a wide range of business and office environments. With its impressive blend of features and technology, the EA241WM presents a compelling option for users seeking high-quality visuals and ergonomics.

One of the key features of the NEC EA241WM is its 1920 x 1200 resolution, which provides a slightly taller display than standard 1080p monitors. This resolution enhances productivity, especially when multitasking, as it allows users to view more content vertically, reducing the need to scroll. The IPS (In-Plane Switching) technology used in the EA241WM ensures excellent color reproduction and wide viewing angles. With a contrast ratio of 1000:1 and a brightness level that can reach up to 250 cd/m², the monitor delivers vibrant images that maintain their clarity from various angles.

The monitor’s ergonomic design is another notable characteristic. It features an adjustable stand that allows users to modify the height, tilt, pivot, and swivel of the screen for optimal comfort. This flexibility is crucial for users who spend long hours in front of the display, as it helps reduce eye strain and promotes better posture. Furthermore, the EA241WM incorporates flicker-free technology and a blue light reduction feature, both aimed at preserving eye health during extended use.

Connectivity is seamless with the NEC EA241WM, which comes equipped with multiple input options, including DisplayPort, HDMI, and DVI-I ports, as well as built-in USB hubs for added convenience. This versatility allows users to easily connect various devices, ensuring that they can work efficiently with their preferred tools.

In terms of energy efficiency, the NEC EA241WM meets Energy Star standards, making it an environmentally friendly option for businesses aiming to reduce their carbon footprint. This monitor is designed to consume less power without compromising on performance, making it a wise choice for organizations focused on sustainability.

Overall, the NEC EA241WM stands out for its combination of advanced display technology, ergonomic features, and connectivity options, making it an excellent choice for professionals seeking a high-performance monitor that enhances productivity while ensuring comfort and visual excellence. Whether used for graphic design, data analysis, or everyday office tasks, the EA241WM is a reliable and efficient tool for any professional setting.