|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| E - 18 |
|
| Troubleshooting/Support |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Problem | Check These Items |
|
|
|
|
|
| Image is unstable, | - Signal cable should be completely attached to the |
|
| unfocused or | computer. |
|
| swimming is | - Use the OSM Image Adjust controls to focus and adjust |
|
| apparent | display by increasing or decreasing the Fine Control. |
|
|
| When the display mode is changed, the OSM Image |
|
|
| Adjust settings may need to be |
|
|
| - Check the monitor and your display card with respect to |
|
|
| compatibility and recommended signal timings. |
|
|
| - If your text is garbled, change the video mode to non- |
|
|
| interlace and use 60 Hz refresh rate. |
|
|
|
|
|
| LED on monitor is | - Power Switch should be in the ON position and power |
|
| not lit (no green or | cord should be connected. |
|
| amber colour can be | - Make certain the computer is not in a |
|
| seen) | (touch the keyboard or mouse). |
|
|
|
|
|
| Display image is not | - Use the OSM Image Adjust controls to increase or |
|
| sized properly | decrease the H. Size. |
|
|
| - Check to make sure that a supported mode and signal |
|
|
| timing has been selected on the display card or system |
|
|
| being used. (Please consult display card or system manual |
|
|
| to change graphics mode or refresh rate.) |
|
|
|
|
|
|
|
|
|
LCD1525E.PM5 | Page 30 | 99/06/09, 14:34 | PageMaker 5.0J |