Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1.Disconnect all cables.
2.Place hands on each side of the monitor and lift up to the highest position.
3.Place monitor face down on a
Figure S.1
4.Place one hand around the base and one hand on the Quick Release Lever. Move the Quick Release Lever in the direction indicated by the arrows (Figure S.2).
5.Lift up the bottom of the stand to unhook it from the monitor (Figure S.3). The monitor can now be mounted using and alternate method. Reverse process to reattach stand.
NOTE: Handle with care when removing monitor stand.
Up
Slide
English
Figure S.2 | Figure S.3 |
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm.
1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1).
Caution: Use ONLY the screws (4 pcs) that are included when |
|
| |
mounting to avoid damage to the monitor and stand. | 200mm | 100mm | |
To fulfil the safety requirements the monitor must be | |||
|
| ||
mounted to an arm which guaranties the necessary |
|
| |
stability under consideration of the weight of the monitor. |
|
| |
The LCD monitor should only be used with an approved |
|
| |
arm (e.g. GS mark). |
|
| |
When using mounting accessories (e.g. VESA (200 x 100)) |
| ||
other than VESA (100 x 100), use the screws M4 size |
|
| |
(Length: bracket thickness + 10mm). |
| 100mm | |