Quick Start, English-4 | NEC 1980FXi instruction

Quick Start

To attach the MultiSync LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI-A signal cable to the connector of the display card in your system (Figure A.2).

For the MAC: Connect the MultiSync Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure B.1).

Figure A.1

Figure A.2

Macintosh

Cable Adapter Figure B.1 (not included)

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

3.Connect the DVI signal cable to the connector on the back of the monitor. Place the video signal cable (Figure C.1). Connect only either VGA or DVI to input 2.

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module’s life.

Collect cables and keep them in the stand with attached cable cover. The cable cover can be attached on the front or back side of Tilt Stand (Figure C.1, C.2).

Please check Tilt, Rise and Lower monitor screen and screen rotation when you manage cables.

4.Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet (Figure C.1).

NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.

5.The Vacation Switch on the left side of the monitor must be turned on. Turn on the monitor with the front power button (Figure D.1).

NOTE: The Vacation Switch is a true on/off switch. If this switch is on the OFF position, the monitor cannot be turned on using the front button. DO NOT switch on/off repeatedly.

NOTE: For the MAC with digital output: Before turning on the MAC, the DVI Input mode must be set to DIGITAL in “DVI SELECTION” of OSM by pressing “SELECT” button then “CONTROL” button when the DVI signal cable is connected to the DVI-I connector (Input1) of the monitor. Otherwise the MAC may not turn on.

6.Turn on the computer. No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the following OSM controls:

•Auto Contrast (Analog input only)

•Auto Adjust (Analog input only)

Refer to the Controls section of this User’s Manual for a full description of these OSM controls.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

English-4

1980FXi specifications

The NEC 1980FXi, launched in the early 1990s, was a pioneering product in the realm of personal computing, specifically aimed at enhancing business productivity and performance. With its cutting-edge technologies for that era, the 1980FXi quickly became recognized for its reliability and efficiency.

One of the standout features of the NEC 1980FXi was its robust processing power, powered by a 32-bit Intel 80386 processor. This processor offered significant performance improvements compared to its predecessors, enabling users to run more complex applications and multitask effectively. The robust architecture allowed for advanced computational capabilities, making it suitable for demanding business environments.

The NEC 1980FXi included an impressive memory capacity for its time, supporting up to 16 MB of RAM. This substantial memory allowance facilitated smoother operation of applications and improved overall system responsiveness. The motherboard offered sockets for additional memory expansion, offering users a clear upgrade path as their computational needs grew over time.

In terms of storage, the 1980FXi featured a hard disk drive, with options typically starting at 40 MB, allowing users to store vast amounts of data, documents, and software. This was complemented by the inclusion of a 3.5-inch floppy disk drive, ensuring compatibility with the prevalent software formats of the day.

Another notable attribute of the NEC 1980FXi was its graphics capabilities. The system supported VGA graphics, providing enhanced visual clarity and color depth for users. This was especially significant for desktop publishing, graphic design, and other visual applications that required detailed graphics output.

Connectivity was also a focus for the NEC 1980FXi. The system came equipped with several ports, including serial and parallel ports, which allowed for easy attachment of peripherals such as printers, modems, and external storage devices. The inclusion of an expansion bus meant that users could further enhance their systems by adding additional hardware components as needed.

With a design that prioritized ease of use, the NEC 1980FXi featured a compact and well-ventilated case, ensuring optimal performance while minimizing heat production. The configuration was user-friendly, which helped organizations streamline their operations without needing extensive technical expertise.

Overall, the NEC 1980FXi represented a significant step forward in personal computing during the early 1990s, combining powerful processing, ample storage, and expandable architecture into a compact and efficient package. This made it a reliable choice for businesses seeking to leverage technology for enhanced productivity and innovation. As a product of its time, the 1980FXi played a vital role in shaping the evolution of desktop computing.