Lexmark X500n manual Print engine paper and media specifications Print area

7100-XXX

Print engine paper and media specifications

Print area

The printable area is up to 4.0 mm (0.158 in) from the top and bottom of the media, and up to 3.0 mm (0.118 in) from the left and right edges. Any information placed outside this specified printable area will not print. For envelopes, the printable area is up to 4.0 mm (0.158 in) of the left and right edges, and 3.0 mm (0.118 in) of the top and bottom edges.

Print engine input and output configurations

The following table shows the standard number of input sources and output destinations, as well as the estimated capacity of each. Capacity may vary and is subject to media specifications and MFP operating environment. The capacities listed are based on plain paper at 75 g/m2.

Sources and capacities		X500n / X502n
	Input sources
Number of standard sources		1
Number of optional input drawers		1
Maximum number of input sources1		2
Maximum input capacity		780
	Input capacities2
Standard input
Primary tray capacity		250
Total standard capacity		250
Optional input
Optional tray 1 capacity		250
Optional tray 2 capacity		530
	Output destinations
Number of standard destinations		1
Output capacities
Standard output bin capacity (top)
Media up to 20 lb paper		250

1Optional input drawer is a 530-sheet capacity drawer. Only one optional drawer may be installed at any time.

2The MFP supports top output (facedown) as standard. No additional output options are available.

Note: All capacities are based on use of 20 lb paper.

General information 1-7