Lexmark T64X manual Understanding jam messages, Paper Jam Remove Cartridge

Page 1

Lexmark™ T64x

Clearing Jams

Guide

Avoiding jams

The following hints can help you avoid jams:

Use only recommended print media.

Do not overload the print media sources. Make sure the stack height does not exceed the maximum height indicated by the stack line on the labels in the sources.

Do not load wrinkled, creased, damp, or curled print media.

Flex, fan, and straighten print media before you load it. If jams do occur with print media, try feeding one sheet at a time through the multipurpose feeder.

Do not use print media that you have cut or trimmed yourself.

Do not mix print media sizes, weights, or types in the same print media source.

Make sure the recommended print side is loaded in the source according to your simplex or duplex needs.

Keep print media stored in an acceptable environment.

Do not remove trays during a print job.

Push all trays in firmly after loading them.

Make sure the guides in the trays are properly positioned for the size of print media you have loaded. Make sure the guides are not placed too tightly against the stack of print media.

Clearing jams

Understanding jam messages

Message

What to do*

200 and 201

Open the top front cover, remove

Paper jams

the print cartridge, and remove the

 

jam.

 

 

202 Paper Jam

Open the rear door on the printer,

Open Rear

and remove the jam.

Door

 

23x Paper Jam

Remove the duplex tray from the

Check Duplex

duplex unit, raise duplex deflector,

 

and remove the jam. Open rear

 

duplex door, and remove the jam.

 

 

24x Paper Jam

Open each tray, and remove any

Check Tray <x>

jammed media.

 

 

250 Paper Jam

Remove all media from the

Check MP

multipurpose feeder, flex and stack

Feeder

the media, reload the multipurpose

 

feeder, and adjust the guide.

 

 

260 Paper Jam

Lift the envelope weight, remove all

Check Env

envelopes, flex and stack the

Feeder

envelopes, reload the envelope

 

feeder, and adjust the guide.

 

 

27x Paper Jam

Open the output bin rear doors and

Check Bin x

then remove the jam.

 

 

28x Paper Jam

Open the finisher top cover and

Check Finisher

then remove the jam. Open the

 

finisher rear door, then remove the

 

jam.

 

 

28x Staple Jam

Open the stapler door, remove the

 

staple holder, remove the staple

 

sheet, clear the jam, reinsert the

 

staples and staple holder, and then

 

close the stapler door.

 

 

*After clearing the jam, press to resume printing.

200 and 201 Paper Jam Remove Cartridge

1Push the release latch, and lower the

multipurpose feeder.

2Push the release latch, and open the top front cover.

CAUTION: The inside of the printer may be hot.

3Lift and pull the print cartridge out of the printer.

Warning: Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge handle whenever you are holding the cartridge.

4Place the print cartridge aside.

Image 1
Contents 201 Paper Jam Remove Cartridge Understanding jam messages23x Paper Jam Open Duplex Rear Door Paper Jam Open Rear DoorPaper Jam Check MP Feeder 23x and 24x jamsPaper Jam Check Env Feeder 27x Paper Jam Check Bin 280 Paper jams28x Paper Jam Check Finisher Clearing staple jams
Related manuals
Manual 52 pages 61.8 Kb Manual 2 pages 24.51 Kb