6Lower the envelope weight.
1 | 2 |
1If the paper is exiting into the bin or finisher, pull the media straight out, and press 
. Otherwise, continue with step 2.
2Push the output bin rear door latches in toward the center. The rear doors will open and drop down.
1Push the finisher rear door latches in toward the center. The rear door will open and drop down.
7Press 
.
270 and 280 Paper jams
Paper jams in this group have been divided into 27x and 28x groups. If you have an output expander,
27x Paper Jam Check Bin x
To clear a jam in the output expander,
Note: If you only have one output option, you may only have one rear door.
3Remove the jammed media.
4Close the output bin rear doors, and make sure all doors are secure.
5Press 
.
28x Paper Jam Check Finisher
To clear a jam in the finisher:
2Remove the jammed media.
3Close the rear door, and make sure the door is secure.
4Lift the front edge of the finisher output bin cover until it locks into position.