E-mailing
Sending e-mail
Tips for e-mailing
•When using the ADF, adjust the paper guide on the ADF to the width of the original document.
•When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.
•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
•Make sure to enter your
•Make sure the printer is connected to an Ethernet or wireless network before sending an
If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person.
The printer supports only one active network connection (Ethernet or wireless) at a time.
•Add contacts to your address book. When sending an
Scanning a document or photo to e-mail
1Load an original document faceup into the ADF or facedown on the scanner glass.
Note: You can attach only one document or photo to each
2From the home screen, navigate to Scan to
3Select the output file type you want to create.
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.
4Touch an option to enter or select the recipients:
•Enter
•Address
•
If necessary, touch OK or Accept each time you make a selection.
5To enter additional recipients, touch Add Recipient, and then enter the
Touch Accept every time you add a recipient.
Note: You can send an
6Select the file type, color, quality, and original size of the document or photo you want to send. If necessary, touch Accept to save each setting.
32