Lexmark 925de, 925dte manual PostScript paper tray support, Tray selected with tray operators

Page 14

PostScript (PS) emulation

14

PostScript paper tray support

When the printer receives one of the operators listed in “Tray selected with tray operators” on page 14, it performs the actions listed in this section. This paper tray selection process ends when a suitable paper source is chosen and paper is fed from this tray.

The printer checks the value of manualfeed in statusdict and the ManualFeed page device parameter. If either one is true, then the printer sends a message to load the requested size in the manual feeder or multipurpose feeder.

The PageSize Policy is set to 0 by means of setpagedevice.

The printer checks the paper size loaded in the current active source to determine if it matches the requested size. If the sizes match, then the paper is fed from the active source.

Note: The current active tray is the last source that was selected from the printer control panel or by the printer language.

If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.

If the requested media size is not found by the previous search, then the following search order is used:

Tray 1

Tray 2

Tray 3

Multipurpose feeder

Tray 4

Tray 5

If the requested size cannot be located in any automatic source, then a configurationerror is issued and the job is flushed.

For printers that support automatic twosided printing (duplexing):

Automatic twosided printing is not supported for custom-size paper or for envelopes in the multipurpose feeder. Automatic twosided printing is supported from the multipurpose feeder for all other papers.

If the paper source is changed before the back side of a twosided page prints, then a blank back page prints, the paper source changes, and the information for the back side of the page is printed on the front side of a page sent from the new paper source.

When these operators are used, it is equivalent to executing the following PostScript emulation sequence:

<</PageSize [x y]/ImagingBBox null /Policies << /PageSize 0>> >> setpagedevice

where x y are the PageSize in points.

Tray selected with tray operators

= Supported

 

X = Not supported

Printer model

Operator

Tray selected (corresponding

C925de, C925dte

X925de

 

image size is set)

 

 

11x17tray

Tray with 11 x 17size paper

 

 

a3tray

Tray with A3size paper

 

 

Image 14
Contents C925de, C925dte, X925de Technical ReferenceEdition notice Contents Index 104 Introduction Understanding letters after model numbersNetwork Learning about the printer Finding information about the printerOther countries and regions -See the printed Printer Control Language PCL page formatting Printable areasSupported paper and envelope dimensions PaperEnvelope PJL commands information Printer Job Language PJLPostScript PS emulation Supported paper sizesPostScript paper tray support Tray selected with tray operatorsPostScript envelope size support Envelope sizes supportedPostScript envelope tray support PostScript PS emulationEnvelopetray operator selections Noise emission levels Printer specificationsAirflow requirement Physical specifications Electrical specificationsPower requirements Clearance requirements Environmental conditionsAltitude and atmospheric pressure specifications Values for the ambient operating environmentPCL emulation commands Appendix a PCL supportSet Page Size Simplex/Duplex Select Secondary Download Font By Font ID Logical Operation Clear Horizontal Margins GL/2 commands Appendix a PCL support Appendix a PCL support Appendix B PJL support Common variables for both printer languagesAppendix B PJL support Lexmark‑unique PJL variables for both printer languages Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Common variables for PCL emulation Lexmark‑unique variables for PCL emulationLexmark‑unique variables for PostScript emulation Status Readback commandsCommon variables for PostScript emulation Lexmark‑unique Lresource variablesUstatus unsolicited status variables PJL messages for auto-continuable conditionsBe Restored Jobs will not be RestoredConfiguration Were not restoredResolution DisabledPort Disabled StandardMaintenance ADF Kit Restore held jobs?Maintenance Resource Save FeatureOption x error Printer serviceSoftware error Port x disabledSpace in flash Memory for Resources Options installedNot enough free Disk CorruptedBelt Life ITU MaintenanceRemove Belt ExhaustedPJL messages for attendance conditions Missing Install MicrCoating Roll Originals fromInsert Close top accessClose door or Close FinisherOpen Rear Door Insert PrintOpen Cover InvalidXx Cartridge Sense ErrorInstall tray Part number Unsupported by DeviceInstall Env Feed Or Cancel JobInstall InstallationPerfectFinish Missing Disks installedTrays attached PerfectFinish EmptyCartridge is low Cartridge LowColor Low CmykRetry? Empty CmykLoad Staples Opmsg messageClose Duplex Install DuplexCheck Duplex Insert Duplex88.1x black Module missingXx Black Cartridge Nearly lowYellow Cartridge Xx Yellow88.1x yellow Black pc unit Life warningReplace black Xx Fuser lifeXx Fuser near TonerChange Cartridge Cyan invalidMagenta YellowBlack PC Defective or Missing CartridgePhotoconductor Abnormal BlackBlack cartridge And/or black Imaging unit 84.41 YellowXx Missing Toner cartridge MissingXx Fuser PJL messages for paper handlingYellow Cartridge And/or yellow Imaging unit Reload printedWrong Paper IncorrectPaper size Open paper Source SizeSource Paper Check paperOrientation or Guides GuideWith Custom Type Name Load singleSheet feeder With Custom StringPages & Press Source to Paper type Paper size Load OrientationMedia Insert trayPJL messages for paper jams Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Device attendance messages Service errorsLexmark‑unique PJL commands File and device protection commands Appendix C PostScript support Supplemental operatorsAppendix C PostScript support Appendix C PostScript support Device parameters Appendix C PostScript support Appendix C PostScript support Appendix C PostScript support User interpreter parameters System interpreter parameters Appendix C PostScript support Appendix C PostScript support Devices supported LPRA% LPRB% LPRC% LPRD% USBA% USBB% USBC% USBD% DelayedOutputClose Enabled Filtering HasNames DelayedOutputClose Enabled Appendix C PostScript support PCLSmartSwitch PortLocation PSSmartSwitch TokenTalkType Zone Enabled Filtering HasNames Interpreter PortLocation Type Appendix C PostScript support 100 Appendix C PostScript support 101 Appendix C PostScript support 102 PostScript message keys commands Index Lresource

925dte, 925de specifications

The Lexmark 925de and 925dte multifunction printers are designed for high-performance office environments, catering to small and medium-sized businesses with the need for efficiency, reliability, and advanced functionality. These models are engineered to deliver a variety of features that streamline workflows while maintaining a commitment to high-quality output.

One of the standout features of both the 925de and 925dte is their robust printing capabilities. With a print speed of up to 60 pages per minute, these printers can handle large volumes of printing with ease. The first-page print time is impressive, allowing users to receive their documents quickly. The high-resolution output ensures that text is sharp, and colors are vibrant, making it ideal for producing professional-looking reports, marketing materials, and other critical business documents.

The Lexmark 925 series integrates advanced printing technologies that enhance overall performance. The printers utilize a state-of-the-art processor and ample memory to support complex jobs efficiently. Additionally, these models are equipped with a high-capacity input tray, accommodating various media sizes and types, which is essential for businesses that require versatility in their printing tasks.

Another significant aspect of the 925de and 925dte is their multifunctionality. These models not only excel in printing but also provide scanning, copying, and faxing capabilities. The scanning function boasts impressive speeds and includes features such as duplex scanning, which allows users to capture double-sided documents swiftly. This feature is particularly advantageous in a busy work environment where time is of the essence.

In terms of user interface, the Lexmark 925 series includes a large, intuitive touchscreen display that simplifies navigation and operation. Users can access various functions with ease, making it accessible for all employees, regardless of their technical expertise. Furthermore, the printers support mobile printing options, enabling users to print directly from smartphones and tablets, aligning with the modern trend of increased mobility in the workplace.

Security is a critical consideration for today's businesses, and Lexmark addresses this need with built-in security features that protect sensitive information. These printers include a secure print function, user authentication, and data encryption, safeguarding important documents from unauthorized access.

In summary, the Lexmark 925de and 925dte are robust, multifunctional printers that combine high-speed printing, advanced scanning capabilities, and user-friendly features. Their design and technology cater to demanding office environments, making them a valuable asset for any organization looking to enhance productivity and maintain high-quality output.