Lexmark 925de, 925dte manual PostScript envelope tray support, PostScript PS emulation

Page 16

PostScript (PS) emulation

16

= Supported

 

X = Not supported

 

Envelope sizes

Printer model

Size name

Literal name

Size (mm)

Size (inches)

Size (points)

C925de,

X925de

 

 

 

 

 

C925dte

 

Commercial 10

4.125x9.5envelope

104.8 x 241.3

4.125 x 9.5

297 x 684

 

 

International B5

176x250envelope

176 x 250

6.93 x 9.84

499 x 708

 

 

International C5

162x229envelope

162 x 229

6.38 x 9.01

459 x 649

 

 

International DL

110x220envelope

110 x 220

4.33 x 8.66

312 x 624

 

 

Other envelope

otherenvelope

296.93 x 427.48

11.69 x 16.83

842 x 1212

 

 

Literal names supported

= Supported

 

X = Not Supported

 

Literal names

Printer model

Literal name

Compatible literal name

C925de, C925dte

X925de

b5envelope

176x250envelope

 

 

c5envelope

162x229envelope

 

 

com10envelope

4.125x9.5envelope

 

 

dlenvelope

110x220envelope

 

 

monarcenvelope

3.875x7.5envelope

 

 

PostScript envelope tray support

If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:

The printer sets the PageSize Policy to 0.

The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the envelope is fed from the active source.

Note: The active source is the last source selected from the printer control panel or data stream.

If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.

If the requested media size is not found by the previous search, then the following search order is used:

Envelope feeder

Multipurpose feeder

Image 16
Contents C925de, C925dte, X925de Technical ReferenceEdition notice Contents Index 104 Introduction Understanding letters after model numbersNetwork Learning about the printer Finding information about the printerOther countries and regions -See the printed Printer Control Language PCL page formatting Printable areasSupported paper and envelope dimensions PaperEnvelope PJL commands information Printer Job Language PJLPostScript PS emulation Supported paper sizesPostScript paper tray support Tray selected with tray operatorsPostScript envelope size support Envelope sizes supportedPostScript envelope tray support PostScript PS emulationEnvelopetray operator selections Airflow requirement Printer specificationsNoise emission levels Power requirements Electrical specificationsPhysical specifications Clearance requirements Environmental conditionsAltitude and atmospheric pressure specifications Values for the ambient operating environmentPCL emulation commands Appendix a PCL supportSet Page Size Simplex/Duplex Select Secondary Download Font By Font ID Logical Operation Clear Horizontal Margins GL/2 commands Appendix a PCL support Appendix a PCL support Appendix B PJL support Common variables for both printer languagesAppendix B PJL support Lexmark‑unique PJL variables for both printer languages Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Common variables for PCL emulation Lexmark‑unique variables for PCL emulationStatus Readback commands Common variables for PostScript emulationLexmark‑unique variables for PostScript emulation Lexmark‑unique Lresource variablesUstatus unsolicited status variables PJL messages for auto-continuable conditionsJobs will not be Restored ConfigurationBe Restored Were not restoredDisabled Port DisabledResolution StandardRestore held jobs? MaintenanceMaintenance ADF Kit Resource Save FeaturePrinter service Software errorOption x error Port x disabledOptions installed Not enough freeSpace in flash Memory for Resources Disk CorruptedITU Maintenance RemoveBelt Life Belt ExhaustedPJL messages for attendance conditions Install Micr Coating RollMissing Originals fromClose top access Close door orInsert Close FinisherInsert Print Open CoverOpen Rear Door InvalidSense Error Install trayXx Cartridge Part number Unsupported by DeviceOr Cancel Job InstallInstall Env Feed InstallationDisks installed Trays attachedPerfectFinish Missing PerfectFinish EmptyCartridge Low ColorCartridge is low Low CmykEmpty Cmyk Load StaplesRetry? Opmsg messageInstall Duplex Check DuplexClose Duplex Insert DuplexModule missing Xx Black88.1x black Cartridge Nearly lowXx Yellow 88.1x yellowYellow Cartridge Black pc unit Life warningXx Fuser life Xx Fuser nearReplace black TonerCyan invalid MagentaChange Cartridge YellowDefective or Missing Cartridge Photoconductor AbnormalBlack PC Black84.41 Yellow Xx MissingBlack cartridge And/or black Imaging unit Toner cartridge MissingPJL messages for paper handling Yellow Cartridge And/or yellow Imaging unitXx Fuser Reload printedIncorrect Paper size Open paper SourceWrong Paper SizeCheck paper Orientation or GuidesSource Paper GuideLoad single Sheet feederWith Custom Type Name With Custom StringSource to Paper type Paper size Load Orientation MediaPages & Press Insert trayPJL messages for paper jams Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Lexmark‑unique PJL commands Service errorsDevice attendance messages File and device protection commands Appendix C PostScript support Supplemental operatorsAppendix C PostScript support Appendix C PostScript support Device parameters Appendix C PostScript support Appendix C PostScript support Appendix C PostScript support User interpreter parameters System interpreter parameters Appendix C PostScript support Appendix C PostScript support Devices supported LPRA% LPRB% LPRC% LPRD% USBA% USBB% USBC% USBD% DelayedOutputClose Enabled Filtering HasNames DelayedOutputClose Enabled Appendix C PostScript support PCLSmartSwitch PortLocation PSSmartSwitch TokenTalkType Zone Enabled Filtering HasNames Interpreter PortLocation Type Appendix C PostScript support 100 Appendix C PostScript support 101 Appendix C PostScript support 102 PostScript message keys commands Index Lresource

925dte, 925de specifications

The Lexmark 925de and 925dte multifunction printers are designed for high-performance office environments, catering to small and medium-sized businesses with the need for efficiency, reliability, and advanced functionality. These models are engineered to deliver a variety of features that streamline workflows while maintaining a commitment to high-quality output.

One of the standout features of both the 925de and 925dte is their robust printing capabilities. With a print speed of up to 60 pages per minute, these printers can handle large volumes of printing with ease. The first-page print time is impressive, allowing users to receive their documents quickly. The high-resolution output ensures that text is sharp, and colors are vibrant, making it ideal for producing professional-looking reports, marketing materials, and other critical business documents.

The Lexmark 925 series integrates advanced printing technologies that enhance overall performance. The printers utilize a state-of-the-art processor and ample memory to support complex jobs efficiently. Additionally, these models are equipped with a high-capacity input tray, accommodating various media sizes and types, which is essential for businesses that require versatility in their printing tasks.

Another significant aspect of the 925de and 925dte is their multifunctionality. These models not only excel in printing but also provide scanning, copying, and faxing capabilities. The scanning function boasts impressive speeds and includes features such as duplex scanning, which allows users to capture double-sided documents swiftly. This feature is particularly advantageous in a busy work environment where time is of the essence.

In terms of user interface, the Lexmark 925 series includes a large, intuitive touchscreen display that simplifies navigation and operation. Users can access various functions with ease, making it accessible for all employees, regardless of their technical expertise. Furthermore, the printers support mobile printing options, enabling users to print directly from smartphones and tablets, aligning with the modern trend of increased mobility in the workplace.

Security is a critical consideration for today's businesses, and Lexmark addresses this need with built-in security features that protect sensitive information. These printers include a secure print function, user authentication, and data encryption, safeguarding important documents from unauthorized access.

In summary, the Lexmark 925de and 925dte are robust, multifunctional printers that combine high-speed printing, advanced scanning capabilities, and user-friendly features. Their design and technology cater to demanding office environments, making them a valuable asset for any organization looking to enhance productivity and maintain high-quality output.