Lexmark 450dn Transparencies, Selecting preprinted forms and letterhead, Printing on letterhead

Page 15

Understanding print media guidelines

•Make sure the Paper Type, Paper Texture, and Paper Weight settings are correct. (See “Paper Menu” in the Menus and Messages Guide located on the Software and Documentation CD for detailed information about these settings.)

•Make sure the paper is properly loaded in the source.

•Flex paper back and forth, and then fan. Do not fold or crease the paper. Straighten the edges on a level surface.

Selecting preprinted forms and letterhead

Use the following guidelines when selecting preprinted forms and letterhead paper for the printer:

•Use grain long papers for best results for 60 to 90 g/m2 weights.

•Use only forms and letterhead printed using an offset lithographic or engraved printing process.

•Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 210°C (410°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 210°C (410°F) without melting or releasing hazardous emissions.

Printing on letterhead

Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for laser printers.

Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the media sources.

Media source or process

Print side

Top of page

250-sheet tray and

Printed letterhead facedown

The top edge of the sheet with the logo is

550-sheet drawer

 

placed at the front of the tray.

 

 

 

 

 

Duplex (two-sided) printing from

Printed letterhead face up

The top edge of the sheet with the logo is

trays

 

placed at the front of the tray.

 

 

 

Manual feeder

Printed letterhead faceup

The top edge of the sheet with the logo enters

 

 

the printer first.

 

 

 

Duplex (two-sided) printing from

Printed letterhead face down

The top edge of the sheet with the logo enters

Manual feeder

 

the printer first.

 

 

 

Transparencies

Feed transparencies from the 250-sheet tray or the manual feeder. Try a sample of any transparencies being considered for use with the printer before buying large quantities.

When printing on transparencies:

Tips on choosing the right print media

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents E450dn Edition June Contents Contents Learning about the printer Printer overviewBasic model Learning about the printer Configured model Menu Paper Menu Reports SettingsUnderstanding the control panel Status Indicates Indicator lightMenu StopDisplay Button or control panel Function6 Navigation ButtonsSource Sizes Types Weight Capacity* sheets Understanding print media guidelinesWhat types of print media can be loaded? Understanding print media guidelines Paper characteristicsTips on choosing the right print media PaperSelecting paper Unacceptable paperMedia source or process Print side Top TransparenciesSelecting preprinted forms and letterhead Printing on letterheadSelecting transparencies EnvelopesCard stock LabelsStoring print media Avoiding jamsLoading the 250-sheet tray on Loading the manual feeder on Loading the 250-sheet tray PrintingPrinting Printing Attaching the dust cover Extending the tray for legal or folio size paperLoading the manual feeder Printing Sending a job to print Linking traysCanceling a job from the taskbar Canceling a print jobCanceling a job from the printer control panel Canceling a job from a computer running WindowsCanceling a job from a Macintosh computer running Mac OS Printing the menu settingsPrinting a network setup Canceling a job from a Macintosh computerPrinting a font sample list Printing held jobsPrinting and deleting held jobs Print Time Filters Copies & Pages or General pop-up menu, select Job RoutingAccessing the system board Installing optionsInstalling options Installing options Access the system board see Accessing the system board on Adding a memory cardAdding a flash memory card Adding a flash memory card Click File Æ Properties Click the Install Options tab Installing an optional 550-sheet drawerRecognizing installed options Click Start Æ Settings Æ PrintersStoring supplies Maintaining the printerDetermining the status of supplies Photoconductor kit end-of-lifeMaintaining the printer Supply Menu selection item What the setting doesConserving supplies Ordering suppliesPart number Description Average cartridge yield Ordering a toner cartridgeChanging a toner cartridge Ordering a photoconductor kit Changing a photoconductor kit Maintaining the printer Machine voltage Part numbers Maintenance kitRecycling Lexmark products Message What to do Clearing jamsIdentifying jams Understanding jam messagesClearing printer jams Clearing a jamClearing jams Clearing jams Clearing jams Clearing a jam in the manual feeder Clearing jams Troubleshooting Online customer support Calling for serviceChecking an unresponsive printer Check the Print as image box Solving printing problemsTroubleshooting Symptom Cause SolutionFinishing Menu Set Page Protect to Off from the Setup MenuSet the Operating Mode to Normal Reduced Curl modeTurning on Reduced Curl mode Solving option problemsOption Action See Storing print media on page 18 for more Solving paper feed problemsProblem Solution Occurring, see Avoiding jams onHttp//support.lexmark.com Solving print quality problemsProblem Action Media guidelines on page 12 for more detailsTroubleshooting Part or all of the page is Driver option Purpose Values† Menu selection Purpose ValuesAdministrative support Adjusting control panel brightness and contrastDisabling control panel menus Restoring factory default settings Administrative supportEnabling control panel menus Disabling Power Saver Adjusting Power SaverUsing the secure Embedded Web Server Selecting printer operating modeSetting security using the Embedded Web Server EWS Setting the system passwordLocking the control panel menus Click Menu Lockout SetupIndustry Canada compliance statement Conventions Electronic emission noticesDirective Power regulation noticeHot surface notice Noise emission levels Waste from ElectricalLaser notice Statement of Limited Warranty for Lexmark E450dnLimitation of liability Index Card Stock & Label Guide Index

450dn specifications

The Lexmark 450dn is a robust monochrome laser printer designed to meet the needs of small to medium-sized businesses, offering high-quality printing along with efficient performance. This reliable printer stands out due to its combination of advanced features, speed, and cost-effective operation.

One of the main characteristics of the Lexmark 450dn is its impressive print speed, capable of producing up to 40 pages per minute. This makes it an ideal option for busy work environments where time is of the essence. In addition, the printer has a first-page-out time of just 6.5 seconds, ensuring that users do not have to wait long for their documents.

The Lexmark 450dn employs advanced printing technologies, such as Lexmark’s Unison Toner. This technology ensures consistent and high-quality output from the first page to the last, with sharp text and detailed graphics. The printer also offers a print resolution of up to 1200 x 1200 dpi, ensuring clarity and precision in every document.

Another key feature of the 450dn is its duplex printing capability, which automatically prints on both sides of the paper. This function not only enhances productivity but also reduces paper usage, making it a more environmentally friendly choice for businesses looking to minimize their ecological footprint.

Connectivity is another area where the Lexmark 450dn excels. It offers multiple connectivity options, including USB, Ethernet, and built-in wireless capabilities. This flexibility allows multiple users within a network to easily access the printer, promoting collaborative work environments.

The printer is designed with a user-friendly interface, featuring a 2-line LCD display that provides essential information and makes operation simple. Furthermore, the Lexmark 450dn supports a variety of paper sizes and types, from standard letter-sized paper to envelopes and labels, accommodating diverse printing needs.

In terms of maintenance, the Lexmark 450dn is designed for easy access to consumables and parts, which promotes user convenience. Its long-lasting toner cartridges contribute to lower overall operating costs, making it an economical choice for higher-volume printing.

Overall, the Lexmark 450dn combines speed, efficiency, and versatility, making it a compelling choice for professionals seeking a dependable printing solution. With its advanced features and thoughtful design, it delivers outstanding performance for a wide range of business applications.
Top Page Image Contents