Lexmark 450dn manual Labels, Card stock

Page 17

Understanding print media guidelines

Labels

The printer can print on many labels designed for use with laser printers, except for vinyl labels. These labels are supplied in letter size, A4 size, and legal size sheets. Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 210°C (410°F) and pressure of 25 pounds per square inch (psi).

Try a sample of any label you are considering using with the printer before purchasing a large quantity.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications.

When printing on labels:

•Set the Paper Type menu item to Labels in the Paper menu. Set the Paper Type from the printer control panel, the printer driver, or from MarkVision Professional.

•Do not load labels together with paper or transparencies in the same source; mixing media can cause feeding problems.

•Do not use label sheets with a slick backing material.

•Do not use vinyl labels.

•Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.

•Use labels that can withstand temperatures of 210°C (410°F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions.

•Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.

•Do not use label sheets that have adhesive to the edge of the sheet. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.

•If zone coating of the adhesive is not possible, remove a 3 mm (0.125 in.) strip on the leading and driver edge, and use a non-oozing adhesive.

•Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside the printer.

•Portrait orientation is preferred, especially when printing bar codes.

•Do not use labels that have exposed adhesive.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide, available on the Lexmark Web site at www.lexmark.com/publications.

Card stock

Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and texture, that can significantly affect print quality. For information on the preferred weight and for the grain direction of print media, see What types of print media can be loaded? on page 12.

Try a sample of any card stock you are considering using with the printer before purchasing a large quantity.

When printing on card stock:

•Cardstock can only be printed from the Manual Feeder.

•Set the Paper Type menu item in the Paper Menu to Card Stock from the control panel, from the printer driver, or from MarkVision Professional. Set the Paper Weight to CardStock Weight, and select the CardStock Weight as

Normal or Heavy for the value. Set this from the control panel, the printer driver, or from MarkVision Professional. Use Heavy for card stock weighing more than or heavier than 163 g/m2 (90 lb).

•Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause media handling or jamming problems.

•Avoid using card stock that may release hazardous emissions when heated.

Tips on choosing the right print media

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents E450dn Edition June Contents Contents Basic model Learning about the printerPrinter overview Learning about the printer Configured model Menu Paper Menu Reports SettingsUnderstanding the control panel Menu Indicator lightStop Status Indicates6 Navigation Button or control panel FunctionButtons DisplayWhat types of print media can be loaded? Source Sizes Types Weight Capacity* sheetsUnderstanding print media guidelines Tips on choosing the right print media Paper characteristicsPaper Understanding print media guidelinesSelecting paper Unacceptable paperSelecting preprinted forms and letterhead TransparenciesPrinting on letterhead Media source or process Print side TopSelecting transparencies EnvelopesCard stock LabelsLoading the 250-sheet tray on Loading the manual feeder on Storing print mediaAvoiding jams Loading the 250-sheet tray PrintingPrinting Printing Attaching the dust cover Extending the tray for legal or folio size paperLoading the manual feeder Printing Sending a job to print Linking traysCanceling a job from the printer control panel Canceling a print jobCanceling a job from a computer running Windows Canceling a job from the taskbarPrinting a network setup Printing the menu settingsCanceling a job from a Macintosh computer Canceling a job from a Macintosh computer running Mac OSPrinting and deleting held jobs Printing a font sample listPrinting held jobs Print Time Filters Copies & Pages or General pop-up menu, select Job RoutingAccessing the system board Installing optionsInstalling options Installing options Adding a flash memory card Access the system board see Accessing the system board onAdding a memory card Adding a flash memory card Recognizing installed options Installing an optional 550-sheet drawerClick Start Æ Settings Æ Printers Click File Æ Properties Click the Install Options tabDetermining the status of supplies Maintaining the printerPhotoconductor kit end-of-life Storing suppliesConserving supplies Supply Menu selection item What the setting doesOrdering supplies Maintaining the printerPart number Description Average cartridge yield Ordering a toner cartridgeChanging a toner cartridge Ordering a photoconductor kit Changing a photoconductor kit Maintaining the printer Machine voltage Part numbers Maintenance kitRecycling Lexmark products Identifying jams Clearing jamsUnderstanding jam messages Message What to doClearing jams Clearing printer jamsClearing a jam Clearing jams Clearing jams Clearing a jam in the manual feeder Clearing jams Checking an unresponsive printer TroubleshootingOnline customer support Calling for service Troubleshooting Solving printing problemsSymptom Cause Solution Check the Print as image boxSet the Operating Mode to Normal Set Page Protect to Off from the Setup MenuReduced Curl mode Finishing MenuOption Action Turning on Reduced Curl modeSolving option problems Problem Solution Solving paper feed problemsOccurring, see Avoiding jams on See Storing print media on page 18 for moreProblem Action Solving print quality problemsMedia guidelines on page 12 for more details Http//support.lexmark.comTroubleshooting Part or all of the page is Driver option Purpose Values† Menu selection Purpose ValuesDisabling control panel menus Administrative supportAdjusting control panel brightness and contrast Enabling control panel menus Restoring factory default settingsAdministrative support Disabling Power Saver Adjusting Power SaverSetting security using the Embedded Web Server EWS Selecting printer operating modeSetting the system password Using the secure Embedded Web ServerLocking the control panel menus Click Menu Lockout SetupIndustry Canada compliance statement Conventions Electronic emission noticesHot surface notice Power regulation noticeNoise emission levels Waste from Electrical DirectiveLaser notice Statement of Limited Warranty for Lexmark E450dnLimitation of liability Index Card Stock & Label Guide Index

450dn specifications

The Lexmark 450dn is a robust monochrome laser printer designed to meet the needs of small to medium-sized businesses, offering high-quality printing along with efficient performance. This reliable printer stands out due to its combination of advanced features, speed, and cost-effective operation.

One of the main characteristics of the Lexmark 450dn is its impressive print speed, capable of producing up to 40 pages per minute. This makes it an ideal option for busy work environments where time is of the essence. In addition, the printer has a first-page-out time of just 6.5 seconds, ensuring that users do not have to wait long for their documents.

The Lexmark 450dn employs advanced printing technologies, such as Lexmark’s Unison Toner. This technology ensures consistent and high-quality output from the first page to the last, with sharp text and detailed graphics. The printer also offers a print resolution of up to 1200 x 1200 dpi, ensuring clarity and precision in every document.

Another key feature of the 450dn is its duplex printing capability, which automatically prints on both sides of the paper. This function not only enhances productivity but also reduces paper usage, making it a more environmentally friendly choice for businesses looking to minimize their ecological footprint.

Connectivity is another area where the Lexmark 450dn excels. It offers multiple connectivity options, including USB, Ethernet, and built-in wireless capabilities. This flexibility allows multiple users within a network to easily access the printer, promoting collaborative work environments.

The printer is designed with a user-friendly interface, featuring a 2-line LCD display that provides essential information and makes operation simple. Furthermore, the Lexmark 450dn supports a variety of paper sizes and types, from standard letter-sized paper to envelopes and labels, accommodating diverse printing needs.

In terms of maintenance, the Lexmark 450dn is designed for easy access to consumables and parts, which promotes user convenience. Its long-lasting toner cartridges contribute to lower overall operating costs, making it an economical choice for higher-volume printing.

Overall, the Lexmark 450dn combines speed, efficiency, and versatility, making it a compelling choice for professionals seeking a dependable printing solution. With its advanced features and thoughtful design, it delivers outstanding performance for a wide range of business applications.
Top Page Image Contents