Lexmark 5056 warranty Relay roller removal

5056-XXX

Relay roller removal

Note: This removal can be used for the expansion paper-feed unit relay roller removal as well.

1.Remove the paper feed unit from the machine.

2.Remove the e-clips and bushings from each end of the relay roller shaft.

3.Remove the five screws (A) that hold the top metal plate on the unit.

A

A

4.Remove the top plate from the paper-feed unit.

5.Slide the relay roller to the right (B), and tilt the roller up and out of the unit.

B

C

6.Pull the relay roller to the left (C), and remove the roller from the paper-feed unit.

Repair information 4-31