Lexmark Z45
Printer overview |
Basic printing |
Printing ideas |
Maintenance |
Troubleshooting |
Notices |
Index |
Using this |
Guide... |
Printing ideas 58
Printing transparencies
You can load up to 10 transparencies, depending on the thickness of the transparencies.
Step 1: Load the transparencies
•
• If the transparencies have paper backing sheets, make sure you separate the paper from the transparencies before you load them.
• Make sure your transparencies are not used or damaged.
•If your transparencies came with instructions, read them carefully.
•Make sure the rough (print) side of the transparencies is facing you. If the transparencies have a removable strip, make sure each strip faces away from you and down.
•Load the transparencies vertically against the right side of the paper support.
Note: Do not push the transparencies too far into the printer.
•Squeeze and slide the paper guide to the left edge of the transparencies.
www.lexmark.com