Lexmark Z45
Printer overview |
Basic printing |
Printing ideas |
Maintenance |
Troubleshooting |
Notices |
Index |
Using this |
Guide... |
Troubleshooting 85
Solving network printing problems
For help, first see Solving general printing problems.
If one or more of the following conditions applies to your network printer, you must enter an IP address to set up your network printer:
•Your printer is listed as unconfigured in the Network Printer Configuration Dialog or in the Printer Selection dialog.
•Your printer is on a remote subnet.
If one or more of the conditions above applies to your network printer, continue with Entering an IP address. If none of these conditions apply, continue with Troubleshooting your network printer.
Entering an IP address
To enter an IP address and set up your network printer:
1Open the Lexmark Z45 Control Panel.
2From the Advanced menu, choose Network Printer Configuration.
www.lexmark.com