Lexmark 25A0592, 25C0044 manual Supplies Menu appears

Page 11
Open the front door.
Warning—Potential Damage: Make sure the printer is not open for 10 minutes or more to avoid overexposing the photoconductor units to light.
Maintaining the printer
11
1
<color> photoconductor replaced appears. Yes appears.
6 Press .
7 Press until Ready appears. The task is complete.
Replacing a toner cartridge
When 88 Replace <color> cartridge, 88 <color> cartridge nearly low, or 88 <color> cartridge low appears on the printer control panel, or when print becomes faded, try to extend the life of the specified cartridge.
Press .
5
Yellow photoconductor, or just replaced.
Black photoconductor appears, depending on the photoconductor you

If you see Ready on the printer display screen after you have replaced a photoconductor, follow Steps 1 through 7 below.

1To specify the replaced photoconductor, press .

Supplies Menu appears.

2Press .

Replace Supply appears.

3

Press .

4

Press the down arrow button until All, Cyan photoconductor, Magenta photoconductor,

Page 10 Page 12
Image 11
Page 10 Page 12
Contents May C734 and C736 SeriesContents Cleaning the printhead lenses Cleaning the exterior of the printerPage Checking the status of supplies Storing suppliesOrdering photoconductors Ordering suppliesChecking the status of supplies from a network computer Ordering toner cartridgesOrdering a waste toner box Replacing a photoconductor Replacing SuppliesPage Page Supplies Menu appears Page Page Page Replacing the waste toner box Before moving the printer Moving the printerMoving the printer to another location Shipping the printer Setting the printer up in a new location
Top Page Image Contents