Lexmark 25C0044, 25A0592 manual Replacing Supplies, Replacing a photoconductor

Page 8

Replacing Supplies

Replacing a photoconductor

There are three different display messages which may appear when a photoconductor replacement is necessary: 84 Replace <color> photoconductor, 84 <color> photoconductor nearly low, or 84 <color> photoconductor low.

Note: A replacement photoconductor can be used with any color.

Replacing a photoconductor is a two‑part process. First, complete the illustrated steps to replace the photoconductor, and then reset the life count and clear printer messages.

1Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductors , do not leave the door open for more than 10 minutes.

2Pull the specified photoconductor up, and then slide it to the right to remove it from the printer.

Maintaining the printer

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents C734 and C736 Series MayContents Cleaning the exterior of the printer Cleaning the printhead lensesPage Storing supplies Checking the status of suppliesOrdering supplies Checking the status of supplies from a network computerOrdering toner cartridges Ordering photoconductorsOrdering a waste toner box Replacing Supplies Replacing a photoconductorPage Page Supplies Menu appears Page Page Page Replacing the waste toner box Moving the printer Before moving the printerMoving the printer to another location Setting the printer up in a new location Shipping the printer
Top Page Image Contents