Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
6Place the paper against the back left corner of the tray, print side down.
Do not load bent or wrinkled print media.
7Close the tray.
Make sure the tray is pushed completely into the printer. Do not exceed the maximum stack height. Overfilling the tray may cause paper jams.
Loading the multipurpose feeder
1Open the multipurpose feeder.
2Squeeze the paper guide lever and slide the guide all the way toward the front of the printer.
3Flex the specialty media back and forth to loosen the stack, and then fan the stack. Do not fold or crease the media. Straighten the edges of the stack on a level surface.
4Arrange the stack of paper or specialty media correctly for the size, type, and print method you are using.
5Place the paper or specialty media, print side up, along the left side of the multipurpose feeder, and then push it in as far as it will easily go.
Do not force the media.
Note: Do not exceed the maximum stack height. Overfilling the feeder may cause jams.
6Squeeze the paper guide lever and slide the guide until it lightly touches the side of the stack.
7If you are loading a different type of media than was previously loaded in the tray, change the Paper Type setting for that tray on the operator panel.